







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Southlake
If you’re pricing a new fence in Southlake, you already know this isn’t a commodity purchase. Between HOA architectural review, city inspections, and lots that have often just been re-graded around a new custom build, a fence here has to clear more hurdles than a fence two towns over. We work with homeowners across 76092 who need wood, aluminum, vinyl, or gates set to a standard that matches the homes around them – with the lot lines verified and the materials specified before anyone digs. Our technicians have up to 12 years of experience, and we bring that to every Southlake project. Call (833) 620-6067 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Southlake Homeowners Call Construction Lewisville for Fence Installation

Southlake is a market where the neighbors notice a crooked gate line. That’s the reputation we’re working against, and honestly, it keeps the work honest. Every fence project starts with a written line-item quote, a conversation about materials at multiple price points, and a clear scope of what’s included – so the estimate you sign is the price you see.
We’re licensed and insured, and we pull the permits and schedule the inspections that Southlake‘s HOA and city code review require before final sign-off. Our technicians have up to 12 years of experience setting posts in North Texas clay and framing gates that don’t sag after the first wet-and-dry cycle. If a line needs surveying before we set a single post, we say so up front rather than discovering it mid-build.
Southlake customers ask the same questions everyone asks in a high-end custom-build market: will the fence meet HOA design standards, will it pass inspection, and will it survive a hail season. We answer all three before the contract, not after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Southlake
We handle the full range of residential and commercial fencing across Southlake, from a privacy run behind a Timarron or Carillon home to perimeter work on a larger lot. Here are the four we handle most often.
Wood Fence Installation in Southlake
Wood remains the most common privacy fence around Southlake’s master-planned communities, and for good reason – it’s the material that reads as native to these neighborhoods. We build cedar and treated-pine runs with posts set at the depth the clay demands, not the depth that’s fast. If your HOA specifies a particular height, cap, or stain color, we work to that spec before the first board goes up.

Chain Link Fence Installation in Southlake
Chain link still has a place on larger Southlake lots, particularly for property-line runs, pet enclosures, and utility-area screening where budget matters more than aesthetics. It’s the most cost-effective way to close off an expansive yard, and it holds up to North Texas wind without the maintenance a wood fence needs. We spec galvanized or vinyl-coated chain link depending on where it’s going and how much sun it takes.

Vinyl Fence Installation in Southlake
Vinyl has become the go-to for Southlake homeowners who want low maintenance without sacrificing curb appeal, and it’s the material most aligned with what HOA committees here expect. Bufftech and ActiveYards make vinyl products rated for wind and UV exposure that hold color through a North Texas summer. A typical vinyl fence installation in Southlake runs $3,500 – $9,000, depending on linear footage, height, and gate count. The written estimate sets the final price.

Aluminum Fence Installation in Southlake
Aluminum is what we install when a Southlake homeowner wants the look of wrought iron without the rust-and-repaint cycle. ActiveYards and Barrette offer residential aluminum in the ornamental styles that fit Southlake’s architectural expectations, and the powder-coat finishes hold up against hail better than bare iron. Aluminum fence installation in Southlake typically runs $4,000 – $10,000, driven mostly by linear footage and ornamental complexity. The written estimate sets the final price.
Trusted Brands We Service in Southlake
We work with the fence-industry names that carry real warranty accountability: Bufftech and ActiveYards for vinyl, Barrette and Master Halco for aluminum and ornamental systems. That brand bench matters when you’re choosing a fence for a Southlake yard. Instead of one take-it-or-leave-it product line, you get real selection at multiple price points, and we install every one of them to the manufacturer’s spec so the warranty holds. If a specific panel or gate style calls for a brand we don’t stock, we source it. Fast turnaround on standard residential runs, and no pressure to pick the product we happen to have on hand. We’ll walk you through the material options before a single measurement is taken.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Southlake Homes
- Posts heaving in expansive clay soil. Southlake’s shrink-swell clay moves as it takes on and releases moisture, and a post set too shallow will lean within a wet-dry cycle. This is especially common where grading changed during a rebuild. Proper concrete depth below the active clay zone is the fix, and it’s not optional here.
- Reused fence lines after a tear-down. In Southlake’s rebuild cycle, the original fence is demolished with the house, and the new run gets laid out without a fresh survey. Encroachment disputes and failed inspection sign-off follow. A current survey before layout is the only reliable protection.
- Materials that fail HOA or city code. Southlake’s master-planned communities carry design standards and code requirements for wind and hail resistance that a generic spec sheet may not satisfy. Choosing off-code materials triggers a change order after the fence is already up, which is the most expensive way to learn the rule.
- Gate sag and misalignment. North Texas heat and shifting soil both work against gate frames over time. A gate sized to the post spacing and braced correctly stays square; one hung to fit the opening usually doesn’t. We spec the hardware and bracing to match the gate weight and span.
Pricing for Fence Installation in Southlake, TX
Southlake fence pricing reflects the material, the lot, and the design review a project has to clear. For the two materials we install most in this market, a typical vinyl fence installation runs $3,500 – $9,000, and an aluminum fence installation runs $4,000 – $10,000. Wood and chain link sit at lower price points; ornamental and gate-heavy runs sit higher. The estimate is free, and the written quote breaks down posts, panels, gates, hardware, and permits line by line, so you can see exactly where the money goes. Every quote is a fixed price set per job by the written estimate. Once we’ve agreed the scope, we don’t add change orders mid-build without pricing them in writing first.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
We Also Serve Cities Near Southlake
Our fence installation team works across the surrounding DFW suburbs as well – Colleyville, Grapevine, Roanoke, and Trophy Club all sit within easy reach of Southlake, and the clay-soil and HOA concerns are much the same. If you’re a few miles outside Southlake and want the same standard of work, call (833) 620-6067. Same written estimates, same permit handling, same brand selection. We’ll confirm your address falls in our service area before scheduling.
Serving Southlake, TX – Our Local Coverage Area
We serve Southlake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Southlake

It pushes fence work to the end of the build cycle and adds steps. In Southlake, the original fence comes down with the house, and the replacement often has to be priced as a separate line once the new custom home is framed. That means fence layout frequently collides with the engineered foundation and drainage swales the clay soil requires, and the fence has to clear HOA and city code for height and materials before final inspection sign-off. Budget for the fence as its own line item, and get the survey and property lines verified before anyone sets a post. Call (833) 620-6067 for an exact quote – estimates are free.
Vinyl and powder-coated aluminum hold up best against North Texas hail and wind, and they hold their finish through a Dallas – Fort Worth summer. Bufftech and ActiveYards vinyl and ActiveYards and Barrette aluminum are all rated for the exposures we see here. Wood is workable if it’s built to spec, but cedar and treated pine take more hail damage and need more maintenance than vinyl or aluminum. Whichever you choose, the material has to be specified for the wind load and hail exposure your HOA and city code review will check. Call (833) 620-6067 for an exact quote – estimates are free.
Posts fail here because the expansive clay heaves and settles as its moisture changes, and a post set too shallow gets pushed and pulled until it leans. It’s worse on Southlake lots where grading changed during a rebuild. The fix is engineering, not luck: set posts with adequate concrete depth below the active clay zone, verify property lines, and choose materials rated for the local conditions. A post that’s set right at the grading edge without that depth is the one that leans within a season. Call (833) 620-6067 for an exact quote – estimates are free.
In most Southlake situations, yes – the HOA architectural review and city permit process both apply, and the fence has to pass inspection before final sign-off. Height, materials, and placement all factor into what gets approved. We pull the permits and schedule the inspections, and we’ll tell you up front what the HOA and city code require for your specific lot rather than discovering it after the fence is built. Skipping the review is what turns a straightforward install into a change order. Call (833) 620-6067 for an exact quote – estimates are free.
You avoid surprise costs by putting the unknown items into the contract as written allowances before work starts. On a Southlake fence after a remodel or rebuild, the unknowns are usually the fence-line survey, the clay-zone post depth, and any HOA or code requirement for material specs. We inspect first, write the allowances into the quote, and price any surprise in writing and get your approval before we touch it. No change order arrives without a signed number. Call (833) 620-6067 for an exact quote – estimates are free.
If you’re ready to price a fence for a Southlake property, call (833) 620-6067 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One contractor for the fence, the gate, and every phase of the exterior, from the ridge cap to the driveway edge.
Written by the team at Construction Lewisville.












