







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Therma-Tru Construction
Construction Lewisville provides independent Therma-Tru construction service in Lewisville: repair, replacement and installation of Therma-Tru fiberglass entry doors, slabs, frames and hardware. We’re not authorized, sponsored or endorsed by Therma-Tru, and we don’t pretend to be. What we do bring is weekly hands-on work with these doors in North Texas heat, which means we know how their skins, frames and locking hardware actually hold up here.
Therma-Tru builds fiberglass entry doors and door systems: Classic-Craft American Style doors, Fiber-Classic and Smooth-Star slabs, and builder-grade Benchmark-style units common in newer Lewisville subdivisions. Fiberglass is a genuinely good choice for this climate. It doesn’t swell like wood, it holds paint, and it resists the humidity that rolls off Lewisville Lake in summer. The catch is that fiberglass doesn’t flex. When a slab settles or a frame moves, the skin takes the stress.
That’s the work we do in Lewisville. Our technicians have up to 12 years of experience, and they’ve seen how these doors age in Castle Hills custom builds, in Old Town pier-and-beam homes, and in the tract housing that makes up most of the city. Call (833) 620-6067. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We service and install Therma-Tru doors as an independent provider, not a dealer or authorized agent.
- Most Therma-Tru calls in Lewisville trace back to frame settlement, hardware drift or sun-baked seals, not door failure.
- We quote repair honestly and only recommend a new slab when the skin is cracked through or the frame is soft.
- Entry-door work often runs alongside window replacement, home additions and garage conversions.
Why Trust Construction Lewisville for Your Therma-Tru Construction?

Therma-Tru doors are prepped at the factory with specific hinge and lock locations. That single fact drives most of what we do. Off-brand hardware rarely lines up with those prepped positions, so a cheap hinge swap often becomes a door that drags, a deadbolt that misses the strike, or a latch that needs a shoulder against it to close. We use quality parts that fit Therma-Tru equipment, which is a different standard than “a hinge that screws in.”
Warranty-safe practice matters too. Cutting new mortises into a prepped stile, drilling extra holes in a fiberglass skin, or forcing a slab into a frame that’s out of plumb can all create problems a manufacturer won’t stand behind. We measure plumb and square before we touch hardware. If the frame is the problem, we fix the frame rather than asking the door to absorb it.
Our technicians have up to 12 years of experience with entry systems, and we work across more than 50 name-brand manufacturers overall, so we’re not learning fiberglass doors on your house. We’ll walk you through what we find, what it costs to fix, and what happens if you do nothing. Straight answers, then a written estimate. That’s the whole pitch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Lewisville
Entry doors in Lewisville take a specific kind of punishment. Summers push the slab and frame in opposite directions, spring hailstorms hammer the exterior face, and the occasional winter ice event drops temperatures fast enough to stress seals that were already tired. Here’s what we see most often.
- Hairline or star fractures at the hinge and lock stile. Fiberglass skins crack where screws concentrate stress, usually after a slab settles or a frame moves. A hairline radiating from a hinge screw is the classic sign. It’s often cosmetic at first and structural later.
- Multi-point and three-point locks drifting out of alignment. When a frame shifts even a fraction, the deadbolt starts missing the strike and the door drags at the top or bottom. Homeowners often assume the lock is broken. Usually the lock is fine and the frame needs re-setting.
- Decorative glass insert seals and caming failing. The seal around a glass insert can break down, letting water track behind the insert and stain interior trim. Caming loosens the same way. Left alone, the water finds the wood.
- Sill and threshold rot on south- and west-facing entries. UV and heat bake the weatherstrip until it hardens and stops sealing. Water gets past the threshold, and the sill underneath starts to soften. West-facing front doors in Lewisville fail first.
- Slab swelling and sticking after a wet spring. Fiberglass itself doesn’t swell, but frames and sills can, and the region’s expansive Blackland clay soils move foundations enough to rack a door frame. A door that sticks every April and frees up by June is telling you something about the frame, not the slab.
A typical call involves a Fiber-Classic entry door that won’t latch cleanly and shows a hairline crack radiating from a hinge screw, often after a summer of expansion and contraction. The usual cause is a combination of a settled frame and hardware that’s drifted out of alignment. A qualified pro will check plumb, re-set the hinges and strike, seal or replace the decorative glass insert if it’s leaking, and only recommend a new slab when the skin is cracked through.
Therma-Tru Parts & Our Repair-vs-Replace Approach

OEM Therma-Tru hinges, strikes, sills and glass inserts are the right call when the slab and frame are sound. They’re made for the prepped locations in the door, and they fit without modification. We don’t stock OEM or genuine Therma-Tru parts, and we’re not a Therma-Tru dealer. What we do is source quality parts that fit Therma-Tru equipment and install them correctly.
The repair-versus-replace call comes down to two questions. Is the fiberglass skin cracked all the way through? Is the frame soft or out of plumb beyond what shimming and re-setting can fix? If the answer to either is yes, replacing the slab or the full unit is usually more honest than patching it twice. If both answers are no, repair is almost always the right move, and it costs a fraction of a new door.
We put that decision in writing before any work starts. Call (833) 620-6067 for a free estimate.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the door for plumb, square and latch alignment, then examine the skin for fractures, the glass insert for seal failure, and the sill and weatherstrip for rot and hardening. We look at the frame as closely as the slab, because that’s where most Therma-Tru problems start.
- 2
Repair or install. For repairs, we re-set hinges and strikes, replace weatherstrip and sills, and seal or replace glass inserts with parts that fit the door’s factory prep. For installs, we set the frame plumb and square before hanging the slab, then tune the multi-point hardware so everything engages cleanly.
- 3
Test. We open and close the door through a full cycle, check that the deadbolt and multi-point locks hit their strikes without force, and run water at the threshold and glass insert to confirm seals hold. A door that needs a shoulder to close isn’t done.
- 4
Warranty and handoff. We document what we installed or repaired so you have a record if a manufacturer warranty question ever comes up, and we explain what to watch for over the next season. If something we installed fails, we come back.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Lewisville
We work on Therma-Tru fiberglass entry doors and door systems: Classic-Craft American Style doors, Fiber-Classic and Smooth-Star slabs, doors fitted with decorative glass and Sims or multi-point hardware, and the builder-grade Benchmark-style fiberglass doors common in newer Lewisville subdivisions. That covers slab replacement, full unit replacement, frame repair, hardware re-alignment, glass insert work, sill and threshold replacement, and weatherstrip service. We also handle entry doors as part of larger projects, which matters in Lewisville: window replacement, home additions and garage conversions often mean a new or relocated entry, and one contractor can coordinate the door with everything around it.
We Also Service These Brands
Therma-Tru is one piece of a bigger bench. We work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, among more than 50 name-brand manufacturers across roofing, windows, fencing and pavers. If your entry-door project turns into a kitchen or bath remodel, we’re already set up to run it. One contractor, every phase.
FAQs – Therma-Tru Construction Service in Lewisville

No. We’re an independent Therma-Tru service provider, not authorized, sponsored or endorsed by Therma-Tru. We repair, install and service Therma-Tru doors with quality parts that fit them, and we quote the work honestly.
Yes. We use hinges, strikes, sills and glass inserts that fit Therma-Tru’s factory-prepped lock and hinge locations, because off-brand hardware rarely lines up with those positions. We don’t stock OEM parts or claim to be a dealer; we source what fits and install it correctly.
Most repairs finish in a single visit. Hardware re-alignment, weatherstrip and sill replacement, and glass insert sealing are typically done in one trip. Slab or full-unit replacement usually runs longer because the frame has to be set plumb and the hardware tuned before the door is hung. The written estimate tells you the timeline before work starts.
Fiberglass entry doors and door systems: Classic-Craft American Style doors, Fiber-Classic and Smooth-Star slabs, doors with decorative glass and multi-point hardware, and builder-grade fiberglass doors. We handle slab replacement, full unit replacement, frame repair, hardware work, glass inserts and sills.
Proper service shouldn’t void a manufacturer warranty, but what can cause problems is cutting new mortises, drilling extra holes in the skin, or forcing a slab into a frame that’s out of plumb. We check plumb and square first and document what we do, so there’s a record if a warranty question ever comes up.
Entry-door repairs are quoted per job, and the written estimate sets the final price. Larger projects that often include door work have typical estimated ranges below. Call (833) 620-6067 for an exact quote. Estimates are free.
| Project | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| Garage Conversion | $30,000 – $80,000 |
Book Your Therma-Tru Service in Lewisville, TX
If your Therma-Tru door drags, leaks at the glass, or shows a crack at a hinge, we’ll come look at it and tell you straight whether it needs repair or replacement. Call (833) 620-6067 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Every quote is written, line by line, and the estimate sets the price.
Written by the team at Construction Lewisville.












