







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Silestone Construction
Construction Lewisville provides independent Silestone construction service in Lewisville, TX – templating, fabricating, installing, repairing and re-polishing quartz slabs for kitchens and baths across the city. What makes our Silestone work different is that we handle the material every week and know how these slabs actually behave in North Texas homes, not just what a spec sheet says. We’re an independent Silestone service provider. We are not authorized, endorsed or sponsored by Silestone or Cosentino, and we don’t claim to be. We simply know the product deeply and specify it honestly. Call (833) 620-6067 to talk through your project. We answer 24/7.
Why Trust Construction Lewisville for Your Silestone Construction?

Our technicians have up to 12 years of experience with quartz slab work – cutting, seaming, edge profiling and re-polishing. That matters with Silestone because the material is unforgiving at the details. A seam set with the wrong epoxy shows up six months later as a yellow line across a light Eternal face. A sink cutout braced too lightly cracks under a cast-iron pot. We template the actual cabinet run, check it for level and shim it before a slab ever comes off the rack, and we use color-matched Silestone and Cosentino seam adhesive rather than a generic tube that dries off-tone.
We also protect your warranty where we can. That means following the manufacturer’s install spec, using the undermount clips and edge profiles the slab is designed for, and never hiding a support problem behind a bead of silicone. If a repair can be done in place and re-polished to near-invisible, we’ll tell you. If a slab needs re-fabricating, we’ll tell you that too, plainly, before you spend a dollar. The written estimate sets the final price, and it’s free.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Silestone Construction Problems We Fix in Lewisville
Quartz slabs fail in predictable ways, and most of what we see in Lewisville traces back to support, adhesive or cleaning habits rather than the slab itself. Here are the five we handle most.
- Hairline cracks and chip-outs at sink cutouts and cooktop corners. Thin 1 to 2 cm slabs over an unsupported span flex just enough to crack at the weakest point – the cutout edge. It usually starts small and spreads toward the nearest seam.
- Seam failure and visible adhesive lines. Mismatched or yellowing epoxy is the culprit, and it shows worst on light Eternal colors. A seam that reads as a dark or gold line against Calacatta Gold or Eternal Statuario was set with the wrong adhesive.
- Etching and dulling on polished faces. Silestone is stain-resistant but it is not acid-proof. Vinegar-based cleaners, citrus products and hard water spotting gradually eat the polish, leaving a chalky ring or a dull patch around the sink.
- Corner cracks and delamination from unlevel cabinets. If the cabinet run isn’t shimmed and leveled before the slab sets, the top carries the load and a corner takes the stress. Islands and overhangs beyond 12 inches fail this way most often.
- Cooktop cutout heat damage and edge chipping. A cutout without proper clearance from a hot cooktop, or a rough edge profile, chips and discolors over time. It’s common on older installs where nobody checked the substrate.
Silestone Parts & Our Repair-vs-Replace Approach

Silestone is a quartz slab product, so the practical parts are the slab itself plus the fabrication consumables: color-matched Silestone and Cosentino seam adhesive, premium undermount sink clips, and the edge profiles the slab is cut for. We don’t stock or order OEM or genuine Silestone parts, and we’re not a Silestone dealer. What we do is source quality parts that fit your Silestone equipment and use the right adhesive for the specific color so the seam disappears.
Our repair-vs-replace call is honest. Chips and seams can be repaired and re-polished to near-invisible. A cracked slab spanning an unsupported dishwasher or an overhang beyond 12 inches is a different story – that gets re-fabricated, because patching a structural crack just moves the problem three months down the road. We’ll show you which situation you’re in before you commit. Call (833) 620-6067 and we’ll walk you through the options.
Our Silestone Service Process – Step by Step
- 1
Diagnosis and template. We come out, check the cabinet run for level and shim, inspect support under cutouts and overhangs, and template the actual counter, including the sink and cooktop openings. This is where most problems get caught.
- 2
Repair or fabrication. For a repair, we epoxy-inject the crack, add support rails, and re-polish in place. For a replacement or new install, the slab is cut, seamed with color-matched adhesive, and edge-profiled to spec.
- 3
Test and final check. We check seams for tone, level the top, confirm sink clips are seated and secure, and inspect the polished face under raking light so nothing is hidden.
- 4
Warranty and care guidance. We back our workmanship, explain what voids a manufacturer warranty, and tell you which cleaners to avoid so the polish lasts.
See the difference
Before
After
Before
After
Before
AfterSilestone Products We Service & Install in Lewisville
We work with the Silestone lines homeowners actually own and research: the Eternal Series, including Calacatta Gold, Eternal Statuario and Eternal Marquina; Miami Vena and Lusso; Charcoal Soapstone in the Suede finish; and Blanco Maple and Blanco Orion. That covers polished and matte faces, light and dark tones, and the different care each needs. We template, fabricate, install, repair and re-polish these in kitchens and baths throughout Lewisville and the surrounding neighborhoods. We don’t claim to stock or carry any of these slabs – we source what your project calls for.
We Also Service These Brands
Silestone is one option, not the only one we know. We also work with Cambria quartz and natural stone, KraftMaid cabinetry, and Kohler and Toto fixtures, so we can specify the right material for your kitchen rather than force the one brand we happen to install. That matters when a slab choice depends on cabinet layout, sink style or budget tier. One contractor, every phase.
FAQs – Silestone Construction Service in Lewisville

No. Construction Lewisville is an independent Silestone service provider. We are not authorized, endorsed or sponsored by Silestone or Cosentino, and we don’t claim to be factory-trained or certified. We’re a local shop that knows the material. Call (833) 620-6067 for a free estimate.
Yes. We use color-matched Silestone and Cosentino seam adhesive, premium undermount sink clips, and edge profiles that fit the slab. We don’t stock OEM or genuine Silestone parts, but we source quality parts that fit your Silestone equipment and use the right adhesive for your specific color. Call (833) 620-6067 to discuss your project.
Most repair and re-polish jobs finish within a single visit, while a full countertop replacement typically takes longer because of templating and fabrication time. The exact timeline depends on slab availability and project scope. Call (833) 620-6067 for a realistic schedule and a free estimate.
We cover the Silestone lines homeowners actually own: the Eternal Series, Miami Vena and Lusso, Charcoal Soapstone in Suede, and Blanco Maple and Blanco Orion. We template, fabricate, install, repair and re-polish these slabs for kitchens and baths. Call (833) 620-6067 to confirm what your project needs.
Not if the work follows the manufacturer’s install spec, which is what we do. Warranty-safe means using the correct adhesive, proper support and the right clips, and never hiding a support problem. We’ll flag anything that could affect your coverage before we start. Call (833) 620-6067 for a free estimate.
Typical estimated ranges in Lewisville run $2,000 to $6,500 for countertop installation, $3,000 to $10,000 for a kitchen island, $800 to $2,500 for a backsplash, and $4,000 to $13,000 for cabinet installation. These are estimates, and the written estimate sets the final price after we template and inspect your cabinets. Call (833) 620-6067 for an exact quote – estimates are free.
| Silestone Service in Lewisville | Typical Estimated Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Cabinet Installation | $4,000 – $13,000 |
Book Your Silestone Service in Lewisville, TX
Silestone work in Lewisville starts with a conversation, not a sales pitch. We’ll walk you through the material options and check your cabinets for level and support before a single measurement is taken. Call (833) 620-6067 for a free estimate and a written line-item quote. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by the team at Construction Lewisville.












