







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction and repair service in Lewisville, TX, covering glass block windows, shower enclosures, and custom mirror systems. What sets our work apart is that we treat Mr-Glass failures as structural symptoms, not surface defects. When a glass block joint cracks or a frameless door stops closing squarely, we look at the soil under the house and the moisture inside the wall before we look at the hardware. We are an independent service provider and are not affiliated with, authorized by, or certified by Mr-Glass. Our technicians have up to 12 years of experience, and we work on lakeside homes in Lewisville where clay movement and humidity push these products harder than most. Call (833) 620-6067 for a free estimate.
Why Trust Construction Lewisville for Your Mr-Glass Construction?

Mr-Glass products are unforgiving of rushed installation. Glass block is heavy and rigid, frameless glass is tempered and expensive, and both depend on the wall behind them staying put. Our technicians understand that the failure you see at the surface usually starts somewhere else: a mortar joint that lost flexibility, a hinge anchored into framing that swelled, a mirror glued tight to drywall that couldn’t dry out.
We service those products with quality parts that fit them. When an original Mr-Glass component is available, we source it. When a line has been discontinued, we use high-quality aftermarket equivalents that match the block size, hinge geometry, or seal profile. We don’t stock OEM or genuine Mr-Glass parts, and we don’t claim to be a Mr-Glass dealer.
The goal on every job is warranty-safe work: repairing the underlying movement or moisture problem, not just cosmetically dressing the surface. You’ll get a written, line-item estimate before any work starts, and the written estimate sets the final price. That’s how we keep trust with homeowners who research brands before they call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Lewisville
Most of what we diagnose in Lewisville falls into a handful of repeat patterns. Here’s what each one means and why it happens in this part of North Texas.
- Cracked or hazed glass block mortar joints. The mortar between blocks is slightly flexible on purpose, because the wall has to move with the house. On expansive Blackland clay, the house moves more than the joint can absorb. The result is hairline cracking or a dull haze as moisture works into the joint. Left alone, that moisture wicks into the framing behind the wall.
- Hardened shower enclosure seals and sweep gaskets. The clear seals along the bottom of a frameless or semi-frameless door are meant to flex every time it opens. Heat and humidity harden them, they lose their spring, and water slips behind the wall. Most leaking enclosures we see in Lewisville are a seal problem, not a glass problem.
- Loose frameless hinges and chipped pivot edges. A frameless door hangs all its weight on two or three hinges. When the framing they’re anchored into shifts with the clay, the door sags and stops closing squarely. Repeated contact chips the tempered edge at the pivot, and a chipped tempered edge has to be replaced, not patched.
- Mirror desilvering along the edges. In a humid bathroom, moisture gets behind the reflective coating. If a mirror is adhesive-mounted directly to drywall, there’s nowhere for that moisture to escape, so the silvering lifts from the edge inward. The fix is a proper mounting method with a moisture gap, not a new mirror over the same problem.
- Moisture intrusion behind a glass block shower wall. Glass block shower walls built on a block field can pass water at the perimeter if the ties or framing have shifted. The tell is usually bubbled paint on the drywall facing the bathroom, not water on the floor.
Mr-Glass Parts & Our Repair-vs-Replace Approach

We choose parts by fit, not by name on a box. For Mr-Glass glass block, that means matching the block size and joint spacing so the field stays true. For shower enclosures, it means hinges and seals that match the original hardware geometry so the door swings without binding. We don’t stock OEM or genuine Mr-Glass parts, and we never claim to. Where Mr-Glass originals are available we source them; where a line has been discontinued, we use quality aftermarket equivalents that fit.
Repair is usually the right call for seals, sweeps, individual hinges, and a single cracked block in an otherwise sound wall. Replacement is the honest recommendation when several blocks are cracked, the framing behind the block field is rotted, or a frameless enclosure has compromised tempered glass. That last one is a safety line: chipped or compromised tempered glass gets replaced, never reinstalled.
Not sure which side of that line your job falls on? Call (833) 620-6067 and we’ll walk you through it. Estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the product and the conditions around it: mortar joint condition, framing behind the wall, hinge anchoring, moisture staining on adjacent drywall. On lake-adjacent Lewisville homes we also look at floodplain conditions that affect how a wall or threshold was built.
- 2
Repair or install. For repairs, we remove only the affected components, rebuild joints with flexible sealant where the wall requires movement, and re-anchor hinges into sound framing. For installs, we set glass block and enclosures to the manufacturer’s spec so the product carries its warranty protection.
- 3
Test. Enclosures get a live water test before we leave. Glass block gets an inspection of joint depth and alignment across the whole field, plus a check that surrounding drywall is dry.
- 4
Warranty-backed handoff. We document the parts used, the work performed, and any underlying condition the homeowner should watch, in writing, with our workmanship warranty attached.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Lewisville
We service and install the Mr-Glass lines homeowners actually live with in Lewisville. That includes Premiere and Vistabrik glass block windows, frameless and semi-frameless shower enclosures, custom mirror and mirror-wall systems, and glass block shower walls and partitions. On the shower side, we handle three sub-services in depth: frameless glass shower enclosures, walk-in shower installation, and tub-to-shower conversion. If you have a Mr-Glass product and aren’t sure which category it fits, describe it to us on the phone and we’ll sort it out before we come out. Our technicians have up to 12 years of experience across these lines.
We Also Service These Brands
Mr-Glass is one part of what we handle. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, so a bathroom or kitchen project around a Mr-Glass shower can stay under one contractor. One team, every phase. That keeps material choices coordinated and the schedule in one place.
FAQs – Mr-Glass Construction Service in Lewisville

Is Construction Lewisville authorized by Mr-Glass? No. We are an independent Mr-Glass service provider. We are not affiliated with, authorized by, or certified by Mr-Glass, and we don’t claim to be. Our credibility comes from hands-on experience with these products and the failure modes they develop in North Texas homes.
Do you use quality parts that fit Mr-Glass equipment? Yes. We source original Mr-Glass components when they’re available and use high-quality aftermarket equivalents that match fit and geometry when a line has been discontinued. We don’t stock OEM or genuine Mr-Glass parts. What matters is that the part fits correctly and the install stays warranty-safe.
How long does Mr-Glass service take? Seal and hinge repairs are typically a short visit. A single cracked glass block in a sound wall can often be handled in a day. A full walk-in shower installation or tub-to-shower conversion is a multi-day project once materials are on site. The written estimate lays out the timeline for your specific job.
What kinds of Mr-Glass products do you cover? Premiere and Vistabrik glass block windows, frameless and semi-frameless shower enclosures, custom mirror and mirror-wall systems, and glass block shower walls and partitions. Call (833) 620-6067 if you’re unsure which category your product fits.
Will service void my Mr-Glass warranty? Not when the work is done to the manufacturer’s spec and with parts that fit the product. The bigger warranty risk is a repair that doesn’t address the underlying cause, like re-sealing a shower door without fixing the framing that shifted. We work warranty-safe so the product keeps its coverage, and we document what we used.
How much does Mr-Glass construction cost in Lewisville? It depends on the product and the scope. These are typical estimated ranges for shower work in the Lewisville market; the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
If you’re comparing tile and glass block options, we’ll walk you through the material choices before a single measurement is taken. Call (833) 620-6067 for an exact quote. Estimates are free.
Book Your Mr-Glass Service in Lewisville, TX
If you own a Mr-Glass product that needs repair, or you’re choosing one and want it installed correctly, we can help. We provide independent Mr-Glass construction service across Lewisville, with free estimates and a written, line-item quote. Call (833) 620-6067. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












