







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose CGI Construction
We provide independent CGI construction service in Lewisville, and what sets our CGI work apart is that we’ve learned how this particular cabinet line behaves once it leaves the showroom. We work with CGI (Carpenter’s Global Innovations) cabinetry weekly, reading its spec sheets, matching its door profiles, and correcting the framing and scribe issues its frameless box construction exposes on real Lewisville floors. From the first measurement to the final hinge adjustment, we treat CGI as a line we know rather than a product we’re guessing at.
To be clear about where we stand: we are an independent CGI service provider. We’re not authorized, sponsored, or endorsed by CGI, and we make no dealer or factory-warranty claims on their behalf. What we offer is hands-on familiarity with CGI’s semi-custom, dealer-sold cabinetry and the repair and installation know-how to keep it working in North Texas conditions. That independence is a strength, because it lets us recommend the right fix instead of the one a manufacturer relationship dictates.
Our technicians have up to 12 years of experience with cabinet work. Call (833) 620-6067. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Lewisville for Your CGI Construction?

CGI cabinets have quirks that only show up after installation, and we’ve handled enough of them to anticipate the trouble spots. The thermofoil door fronts on MDF cores are the most common headache: in a hot DFW summer, that foil can lift and peel at the edges, especially near a sink or dishwasher where moisture does the most damage. The frameless boxes are strong until a slow leak or an ice-maker line goes unnoticed, at which point the particleboard core swells and the seam opens.
The undermount soft-close slides are another point of failure. When cabinets are set out of level on a sloped Lewisville slab, those slides lose their dampening or start to sag, and a drawer that used to glide stops self-closing. Painted MDF and foil doors also chip at the corners and around the hinge bores after repeated adjustment, which is why we tune hinges carefully rather than cranking them.
We use quality parts that fit CGI equipment, and we work warranty-safe: we don’t drill, cut, or alter a box in ways that would give a manufacturer grounds to deny a claim. We’re not a CGI dealer and don’t carry genuine CGI parts as a stocking policy, but we source fronts and hardware that match your existing line when it’s still available. That combination of familiarity and restraint is what keeps a CGI kitchen working the way it should.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Lewisville
These are the CGI issues we see most often in Lewisville homes. Each one has a cause worth understanding, because the cause usually points to the right fix.
- Thermofoil delamination at door and drawer edges. The foil skin lifts where moisture wicks into the MDF core, and the hot, humid North Texas summers speed it up. Sinks and dishwashers are the usual epicenters, because steam and splashes sit against the edge of the door all day.
- Swollen frameless box seams and particleboard cores. A slow supply-line leak or an ice-maker line that dripped behind the fridge for months will puff the core and open the box seam. Once particleboard swells, it doesn’t come back, so the affected box usually gets replaced rather than patched.
- Soft-close undermount slides that lose dampening or sag. When a run of cabinets sits out of level on a sloped slab, the slides fight gravity and the dampener gives out. A drawer that slams or won’t close fully is often a leveling problem, not just a bad slide.
- Painted MDF and foil doors chipping at corners and hinge bores. Repeated hinge adjustment wears the screw holes and chips the finish at the tight corners. Careful tuning and touch-up systems preserve the look far better than over-tightening.
- Door-profile mismatch after a partial upgrade. When only some cabinets get replaced, matching the existing shaker or slab profile and finish matters, or the new doors read as visibly different under kitchen lighting.
Each of these has a straightforward path to repair once you know what you’re looking at. None of them requires tearing out a whole kitchen by default.
CGI Parts & Our Repair-vs-Replace Approach

How we handle CGI parts comes down to matching what’s already there and being honest about when replacement beats repair. When the CGI line is still stocked, we match door profiles and finishes with OEM fronts and hardware so the fix blends in. Where an exact OEM match has been discontinued or lead times would stall your kitchen, we use quality aftermarket slides, hinges, and touch-up systems that fit the equipment and hold up.
On repair versus replace, the deciding factor is usually the box. If a run of doors has failed at the foil edges but the boxes are sound, replacing the fronts is typically smarter and far less disruptive than a full cabinet tear-out. But a swollen, water-damaged box gets replaced, not patched, because no amount of new front will fix a core that’s already given up. We make that call with you, up front, before any work starts.
Every job is priced per project by a written estimate, so you know the number before we begin. Call (833) 620-6067 to talk through your CGI cabinets and get a free estimate.
Our CGI Service Process – Step by Step
We follow the same disciplined sequence on every CGI job, because skipping a step is how small cabinet problems turn into expensive ones.
- 1
Diagnosis. We pull the affected fronts, check the frameless boxes for swelling and seam separation, and inspect the slides and hinges. This is where we find whether the real problem is moisture, leveling, or worn hardware.
- 2
Repair or install. For a repair, we replace failed slides and match fronts to your profile and finish. For an install, we shim and fasten the run properly to the floor and wall before anything goes on top.
- 3
Pre-countertop leveling. If a new quartz or granite top is going on, we shim and set the cabinets to the new countertop layout rather than the old one, so the surface sits true and the doors align.
- 4
Test and adjust. We open and close every door and drawer, tune the soft-close dampeners, and confirm alignment under load before we call it done.
- 5
Warranty and documentation. We leave you with a clear record of the parts and work performed, so any future service or manufacturer question has a clean paper trail.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Lewisville
We service and install the range of CGI cabinetry homeowners actually own, not a single product family. That includes CGI’s Euro-style full-overlay frameless cabinets in shaker and slab profiles, thermofoil door and drawer fronts on MDF cores, raised-panel maple and painted MDF door styles, and the drawer boxes with undermount soft-close slides that come with the line. We handle everything from a spot repair on one failed drawer to a full kitchen install, and we’re comfortable working around existing countertops or coordinating a new quartz or granite surface into the same run. If you’re adding an island or refacing a wall of cabinets, we keep the profile and finish consistent so the room reads as one design rather than a patchwork. Tell us what you have and we’ll tell you what it needs.
We Also Service These Brands
CGI is one line in a much wider bench. We also work with KraftMaid cabinetry, Cambria, Silestone, and Kohler, so if your kitchen mixes brands or you’re weighing a change, we can work across them without sending you to a different contractor for each piece. That multi-brand reach matters when one product’s lead time slips and another can fill the gap.
FAQs – CGI Construction Service in Lewisville

No. We are an independent CGI service provider, not an authorized dealer, and we’re not sponsored or endorsed by CGI. We work on CGI cabinetry with the hands-on familiarity of a shop that sees the line regularly, but we make no manufacturer authorization or factory-warranty claims. For an exact quote on your CGI work, call (833) 620-6067 – estimates are free.
Yes. We match door profiles and finishes with OEM fronts and hardware when the line is still stocked, and we use quality aftermarket slides, hinges, and touch-up systems where an exact OEM match is discontinued or would delay your kitchen. We don’t claim to stock genuine CGI parts, but we source what fits properly and holds up. Call (833) 620-6067 to discuss your parts needs.
Most single-visit CGI repairs, like replacing failed slides or swapping a few door fronts, are handled in one appointment, while a full cabinet install or a run of new fronts takes longer and depends on part availability. The written estimate lays out the expected timeline before work starts. Call (833) 620-6067 for a free estimate and a realistic schedule.
We cover CGI’s Euro-style frameless cabinets in shaker and slab profiles, thermofoil door and drawer fronts, raised-panel maple and painted MDF door styles, and drawer boxes with undermount soft-close slides. That spans spot repairs, refacing, and full installs. Call (833) 620-6067 to confirm your specific product.
Proper service shouldn’t, and we work warranty-safe by avoiding cuts or alterations that would give a manufacturer grounds to deny a claim. We’re independent, so we can’t speak for CGI’s warranty terms, but we keep a clean record of parts and work so you have documentation if a question comes up. Call (833) 620-6067 to talk it through.
Typical estimated ranges for CGI-related work in Lewisville are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
Call (833) 620-6067 for an exact quote on your Lewisville CGI project – estimates are free.
Peeling thermofoil doors can often be repaired by replacing the affected fronts while keeping sound boxes, so you usually don’t need to replace every door in the run. The deciding factor is the box underneath: if the MDF core has swollen from moisture, that box gets replaced rather than patched. Call (833) 620-6067 for a free assessment.
Yes. Frameless CGI cabinets need to be shimmed and set to the new quartz or granite layout rather than the old countertop line, so the surface sits true and the doors align afterward. Skipping that leveling step is how drawers start to sag. Call (833) 620-6067 to plan your countertop install.
We work to match your existing shaker or slab profile and finish when adding cabinets for an island, and we source OEM fronts when the line is still stocked or quality matches when it isn’t. Consistent profile and finish keep the new island reading as part of the room. Call (833) 620-6067 to discuss your match.
Hot, humid DFW summers are the main reason thermofoil lifts at the edges near sinks and dishwashers, because steam and splashes sit against the MDF core and wick in. That moisture is what drives delamination and eventual core swelling. Call (833) 620-6067 for a repair that addresses the cause, not just the symptom.
A reface is usually worth it when the boxes are sound and only the fronts have failed, since it costs less and disrupts the kitchen far less than a full tear-out. Full replacement makes more sense when multiple boxes have swollen or the layout itself needs to change. Call (833) 620-6067 for a free estimate to weigh both paths.
Book Your CGI Service in Lewisville, TX
Whether it’s a peeling thermofoil door, sagging soft-close drawer, or a full CGI cabinet install ready for new quartz, we’re here to help. In a typical CGI kitchen job, a homeowner notices the foil peeling near the dishwasher and a drawer that no longer self-closes; we pull the fronts, check the boxes for swelling, replace the failed slides, and level the run before new doors go on. Call (833) 620-6067 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












