
Driveway & Pavers What It Really Costs: What Lewisville Homeowners Pay in 2026
Two quotes land in your inbox for the same 400 square feet of driveway. One says $7,000. One says $12,000. Both can be honest. The difference usually lives in three lines most bids never spell out: how deep they excavate, what grade of base stone goes back in, and how the edges get held. Skip those and you’re not comparing driveways. You’re comparing numbers. Here’s what a driveway actually costs in Lewisville in 2026, line by line, so your next bid reads like an apples-to-apples document instead of a guess.
If you’d rather have someone walk the site and price it properly instead of piecing it together, call (833) 620-6067.
What do driveway pavers cost per square foot in Lewisville in 2026?

Installed paver driveways in Lewisville typically run $14 to $24 per square foot in 2026, stamped concrete lands around $10 to $16, plain poured concrete sits near $7 to $11, and asphalt comes in around $5 to $8. Those are estimates for a standard residential drive with proper base prep. The written estimate sets the final price, and it should itemize every layer beneath the surface.
Here’s the line-item breakdown we’d want to see on any bid for a Lewisville driveway:
| Line item | Typical range (2026) |
|---|---|
| Excavation and haul-off | $1.50 – $3.00 / sq ft |
| Compacted limestone base (4 – 8 in.) | $2.00 – $4.50 / sq ft |
| Geotextile fabric | $0.25 – $0.60 / sq ft |
| Edge restraint (concrete or steel) | $4 – $9 / linear ft |
| Paver material + install (Belgard, Pavestone) | $8 – $15 / sq ft |
| Polymeric sand + final compaction | $0.50 – $1.25 / sq ft |
Notice how the top five rows can swing tens of thousands of dollars on a long drive without a single paver changing. That’s the whole story behind the 60 – 80% spread in Lewisville quotes. Concrete, stamped concrete, and asphalt all carry their own base requirements too, so the same spreadsheet applies no matter which surface you pick. When you’re ready to compare real numbers, our driveway & pavers team can price it either way.
Which three line items do Lewisville contractors bundle or leave out?
Excavation depth, base material grade, and edge restraint type are the three items most often folded into a single “install” number, and they’re exactly the three that decide whether your driveway survives a decade of North Texas soil movement. Ask for each one separately, in writing, on every bid.
Excavation depth. A contractor who scrapes off 4 inches and one who cuts 10 inches are doing different jobs. Depth determines how much base can go back in. On a Texas black-clay lot, that matters more than the paver style you choose.
Base material grade. Compacted crushed limestone isn’t a commodity. Grade, gradation, and the number of compacted lifts all change the price and the performance. Look for the word “compacted” followed by an actual depth number. “Proper base prep” means nothing.
Edge restraint type. Concrete curb, steel angle, or plastic edge restraint all hold a different line under load. Cheap bids often skip restraint entirely and rely on the pavers locking against each other. That works until the first heavy summer rain finds the weak spot.
If you’re also fencing the yard while you’re at it, our fence installation service can coordinate the fence line with the driveway pour so you don’t pay twice for haul-off.
Do permits and setbacks add real cost to a Lewisville driveway?

Yes, and skipping the permit is the more expensive mistake. Lewisville requires a permit to widen, replace, or add a driveway apron in most cases, and city setback rules govern how close the surface can sit to the property line and how much of the front yard can be paved. Permit fees are typically modest, but the cost of an unpermitted driveway shows up at resale, when a title search or buyer inspection flags a non-conforming slab.
What drives real cost here:
- Setback compliance: a driveway that pushes past the allowed line has to be cut back or re-engineered.
- Impervious-cover rules: too much hardscape in the front yard can trigger drainage requirements.
- Right-of-way work: modifying the apron often needs a separate inspection and sign-off.
- Re-inspection fees: missed details mean paying the city twice.
Before you sign anything, ask your contractor to confirm they’re pulling the permit and handling the inspection. If the answer is “you don’t need one for this,” get that in writing and verify it with the city. Asking is free, and it protects a purchase that stays under your tires for years.
Why does a $14,000 paver driveway beat a $7,000 concrete pour over 10 years?
On expansive clay soil, the cheaper surface often costs more inside a decade. A properly based paver driveway can be lifted, re-leveled, and re-set paver by paver when the ground shifts. A poured slab cracks, and replacing a cracked section costs almost as much as pouring the whole thing again. That’s the cost-per-year math most estimates skip.
Run it honestly:
- Concrete at $7,000 with one major repair in ten years: roughly $9,500 – $10,500 total.
- Pavers at $14,000 with zero structural work and one sand top-up: roughly $14,500 total.
- Pavers at $14,000 needing one localized re-level: adds a modest repair, still no full replacement.
The gap closes faster than homeowners expect, and it flips entirely in neighborhoods where the clay really moves. Lewisville has plenty of those. Add resale value, and pavers usually win on total cost, not just curb appeal. A correct base does most of that heavy lifting, which is why the depth and restraint numbers matter more than the pattern.
What are the red flags in a low driveway bid in North Texas?

The three fastest ways to spot a bargain bid that won’t last: no geotextile fabric called out, a base depth under 4 inches, and no drainage slope anywhere in the scope. North Texas clay plus a monsoon-grade spring storm is a stress test. A driveway engineered without those three details fails that test.
Watch for these in writing:
- No fabric. Geotextile keeps the base stone from pumping into soft clay. Missing it means the base slowly sinks.
- Base depth under 4 inches. Thin base on expansive soil is a recipe for rutting and settling.
- No slope callout. Water has to leave the driveway. Any bid that doesn’t mention pitch, swales, or a drainage plan is an incomplete bid.
- No edge restraint line item. A driveway with no restraint is a pile of pavers waiting for gravity.
- Lump-sum pricing. One number and nothing else is the easiest way to hide a thin build.
When you compare bids, put them side by side and look for who wrote down the boring stuff. The bid with the most detail isn’t always cheapest, but it’s the one you can actually hold someone to.
When should you call a pro instead of pricing it yourself?
If your driveway involves excavation deeper than a few inches, soft or shifting clay, new drainage, or a permit, it’s a pro job. Base compaction is the difference between pavers that sit for fifteen years and pavers that rock within two. A plate compactor rented for a weekend won’t get you there, and neither will hand-tamping limestone.
This is also where material selection pays off. We work with Belgard, Pavestone, Techo-Bloc, Unilock, Tremron, and Cambridge Pavers, so you can compare actual products instead of taking whatever a single-brand installer stocked. We’ll walk you through the material options before a single measurement is taken, and the number you get is a written line-item estimate, not a handshake figure. If you’re planning bigger changes at the same time, our home additions & ADU team can coordinate the driveway with foundation work rather than working around it later.
Related services in Lewisville: driveway & pavers, fence installation, and full construction lewisville exterior work under one contractor.
The Bottom Line
The variance in Lewisville driveway quotes isn’t dishonesty. It’s specification. Same square footage, wildly different builds. Concrete, stamped concrete, and asphalt are all on the table in 2026 at very different price points, but no surface performs without the right excavation depth, the right base grade, the right restraint, and a permit that stays compliant with city setback rules. Demand line items. Compare apples to apples. Then pick the surface that wins on cost per year, not just on the invoice.
If you’re in Lewisville and need help, Construction Lewisville offers free estimates. Call (833) 620-6067. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Frequently Asked Questions
Most Lewisville paver driveways in 2026 land between $14 and $24 per square foot installed, depending on base depth, edge restraint, and which Belgard or Pavestone collection you choose. The written estimate sets the final price. Call (833) 620-6067 for an exact quote, and estimates are free.
Not if the bid is itemized right. A written estimate that spells out excavation depth, base grade, edge restraint, and drainage should hold through the job. If a contractor is vague on any of those, expect the number to move. Ask for line items up front and the estimate stops being a starting point. Call (833) 620-6067 for a written, fixed-price quote.
Yes. Most Lewisville driveway replacements, widenings, and apron modifications need a permit, and we pull it and schedule the inspection as part of the job. Unpermitted driveways can cause title issues at resale, so it’s worth confirming before work starts. Call (833) 620-6067 to talk through your project.
A standard residential driveway typically takes a few days for excavation and base, then a few more for pavers and finishing, weather depending. Large or complex drives run longer. Your written estimate includes the expected timeline. Call (833) 620-6067 to schedule a free estimate.
Written by the team at Construction Lewisville.
Need Construction Help?
Call Construction Lewisville - licensed & insured, here with fast help in Lewisville.
(833) 620-6067