







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Dvele Construction
Construction Lewisville provides independent Dvele construction service in Lewisville – roof repair at module seams, standing seam metal roofing, full kitchen remodeling, and finish work tuned to factory-built modular homes. What makes our Dvele work different is that we read the factory build sequence before we touch a wall: we assume the module left the plant plumb and square, not that it arrived that way. We are an independent service provider. We are not affiliated with, authorized by, or endorsed by Dvele, and we don’t sell their homes.
That independence matters on a Dvele house. A Dvele home arrives on site as near-complete boxes, crane-set and married together. Everything a site-built house does slowly over months, a Dvele home did at the factory and on set day – and the finish work is where problems show up. Out-of-plumb module walls, tile lipping at module boundaries, and roof penetrations at the seams all trace back to that sequence. Around Lewisville, add the eastern shore of Lewisville Lake, floodplain and hillside terrain, and a housing stock split between 1970s-2000s tract homes, older pier-and-beam places in Old Town, and newer large-lot custom builds in Castle Hills and Homestead. Call (833) 620-6067 to schedule a free estimate.
Why Trust Construction Lewisville for Your Dvele Construction?

Our technicians have up to 12 years of experience, and on Dvele homes that experience is spent reading how the module was actually built. A factory-installed cabinet run set against a module wall isn’t hung off studs the way a site-built kitchen is – it’s fastened to a wall the plant finished before the unit ever left. When we service a Dvele kitchen, we check whether the cabinet box is racked or whether the wall behind it moved, because the fix is different for each. We measure the wall, not just the door.
We use quality parts that fit Dvele equipment. For anything tied to the module envelope – marriage-joint flashing, exterior trim, factory cabinet door and drawer fronts – we source Dvele-matched or OEM-spec components so the joint geometry and finish match what the plant designed. We don’t claim to stock OEM or genuine Dvele parts, and we’re not a Dvele dealer. We repair, install, and service Dvele homes with parts built to fit them.
Warranty-safe practice is part of the job. When a repair touches an envelope component or a factory finish, we work to the manufacturer’s spec and document what we did, so a later warranty question has a clear paper trail. On envelope work we don’t improvise a detail where the plant had a designed one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Lewisville
Most Dvele failures in Lewisville start at one of four places: the marriage joint, the factory-set wall, the bath pod, or set-day damage that only surfaces after the home settles. Here’s what we see and why it happens.
- Roof marriage-joint leaks. Where two modules join on the roof, the factory flashing meets field-installed roofing – standing seam or shingle. North Texas thermal cycling flexes that joint through hot summers and cool nights, the sealant loses its seal, and water tracks along the seam into the ceiling assembly. It shows as a stain that reappears after the next hard rain. This is the most common call we get.
- Exterior wall-line cracking. The vertical joint between modules on the exterior wall telegraphs and cracks as the two boxes move slightly against each other. Left alone it opens enough to let water in and stain the wall cavity.
- Cabinet doors that rack. Factory-set drywall and cabinet walls can end up slightly out of plumb or square after transport and crane-set. Doors stop closing evenly, and countertop seams open at the module boundary. It looks like a cabinet problem and is often a wall-and-settlement problem.
- Bath pod sealant failure. On factory bath and shower surrounds, the pan-to-wall sealant joint fails and water tracks behind the surround into the module floor cavity. The visible sign is a re-wetting stain or soft flooring near the shower base, not a drip.
- Set-day damage that shows up late. Transport and crane-set stress leaves hairline cracks at corner bead and ceiling drywall joints, cracked tile, and dinged cabinet faces. Some only appear after the home is leveled and settled, which is why we re-check finish work after the leveling, not before.
A typical job goes like this. A Dvele homeowner notices a stain spreading across a ceiling near where two modules meet, and after the next hard rain the same spot reappears. The usual cause is the marriage-joint flashing and sealant at the module seam, which flexes with thermal movement and loses its seal, letting water track along the joint into the ceiling assembly. A qualified local pro typically opens the seam, inspects and resets the flashing, replaces failed sealant with a compatible membrane or metal detail, and confirms the repair with a water test before closing it back up.
Dvele Parts & Our Repair-vs-Replace Approach

We repair rather than replace whenever the failure is a seal, a joint, or a hinge. On a Dvele home that covers the large majority of calls: resealing a bath-pod surround, resetting marriage-joint flashing, rehanging or adjusting a factory cabinet door that racked. The part that failed is a gasket or a hinge, not the whole assembly, and replacing the assembly because a joint failed wastes money and disturbs a factory finish that was fine.
For anything tied to the module envelope, we use Dvele-matched or OEM-spec components – marriage-joint flashing, exterior trim, factory cabinet door and drawer fronts – so the joint geometry and finish match what the plant designed. For interior tile, plumbing trim, and countertops, quality aftermarket is often the better value and a better fit for a Lewisville kitchen remodel. Replacement is reserved for structural or water-damaged module sections, where a compromised cavity or a rotted deck section can’t be reliably repaired. Call (833) 620-6067 for a free estimate and we’ll tell you which side of that line your job falls on – estimates are free.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We read the factory build sequence before we touch anything – which modules married where, how the envelope was designed to shed water, where the factory set the cabinets and bath pods. On a suspected roof leak we trace the stain back to the nearest marriage joint and test that joint specifically, not the whole roof.
- 2
Repair or install. We work with what the plant actually shipped. Roof seams get compatible membrane or metal detail and Dvele-matched flashing; factory cabinet fronts get matched components; interior tile and fixtures get quality aftermarket set over the substrate we actually find. We don’t assume a site-built wall or roof deck where there isn’t one.
- 3
Test. Every envelope repair gets a water test before we close it back up, and we re-check finish work after the home is leveled and settled. A cabinet door that still racks after adjustment tells us the problem is the wall, and we address that rather than re-hanging the door again.
- 4
Warranty. We document the repair – what failed, what we replaced, what we resealed – so a later warranty question has a clear record. Envelope work is done to the manufacturer’s spec so a designed joint stays as designed.
Dvele Products We Service & Install in Lewisville
We service Dvele’s single-family modular home in two- and three-module configurations, Dvele ADU and accessory dwelling unit modules, and multi-story stacked modular residences – including custom-configured modular homes with factory-installed cabinetry and bath pods. On those homes we handle roof repair at module seams, standing seam metal roof work, full kitchen remodeling, cabinet and countertop installation, and shower and bath-pod work. If you’re adding a Dvele ADU to a Lewisville lot, the same team that services the modules handles the site work and the finish. We don’t claim to stock Dvele products, and we don’t sell Dvele homes.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Dvele is one brand in a wider bench. We work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler, Moen, Grohe, and Delta fixtures – plus GAF, CertainTeed, and Owens Corning roofing. If your Dvele kitchen needs new cabinet fronts from one of those lines or a countertop match, we can source it. One contractor, every phase.
Dvele Construction Pricing in Lewisville

These are typical estimated ranges for the work we do on Dvele homes in Lewisville. They are estimates – the written estimate sets the final price. Your actual number depends on the module configuration, the access, and what we find when we open a seam or wall.
| Service | Typical estimated range |
|---|---|
| Roof Repair (module seam and flashing) | $400 – $1800 |
| Standing Seam Metal Roof | $15000 – $40000 |
| Full Kitchen Remodeling | $14000 – $45000 |
| Cabinet Installation | $4000 – $13000 |
| Countertop Installation | $2000 – $6500 |
| Backsplash Installation | $800 – $2500 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
Call (833) 620-6067 for an exact quote – estimates are free.
FAQs – Dvele Construction Service in Lewisville
Because the marriage-joint flashing and sealant at the module seam flexes with thermal movement and loses its seal, letting water track along the joint into the ceiling assembly. It’s the most common Dvele roof problem we see in Lewisville, and the repair is opening the seam, resetting the flashing, and replacing the failed sealant with a compatible membrane or metal detail. Call (833) 620-6067 to schedule a free estimate.
It’s often both, and the order matters. A factory-set cabinet run is fastened to a module wall that can end up slightly out of plumb or square after crane-set, and Lewisville’s expansive Blackland clay soils shift under the foundation on top of that. We check the wall and the cabinet box separately before deciding what to fix. Call (833) 620-6067 for a free estimate.
Yes. Standing seam works on a Dvele modular roof, and it handles the thermal cycling at module seams well when the panels and flashing are detailed to the joint rather than treated like a site-built deck. It’s a typical $15000 – $40000 estimated range depending on size and configuration. Call (833) 620-6067 and we’ll walk the roofline with you – estimates are free.
Usually not. On factory bath pods the pan-to-wall sealant joint is the failure point, and water tracks behind the surround into the module floor cavity from there. Resealing the joint and inspecting the cavity behind it fixes most cases without replacing the shower. Call (833) 620-6067 for a free estimate.
Yes, in three ways: the walls are factory-set and may not be plumb, tile lipping shows at module boundaries, and envelope work has to match the joint geometry the plant designed. That’s why we read the build sequence first. Call (833) 620-6067 to talk through your Lewisville project – estimates are free.
It depends on the service: roof repair at module seams runs a typical $400 – $1800, a full kitchen remodel $14000 – $45000, and standing seam metal roofing $15000 – $40000. Those are estimated ranges, and the written estimate sets the final price. Call (833) 620-6067 for an exact quote – estimates are free.
Book Your Dvele Service in Lewisville, TX
If you own a Dvele home in Lewisville, you don’t need a generalist who’s never opened a module seam. You need someone who reads the factory build first. We service, repair, and install Dvele homes across Lewisville – roof seams, kitchen remodeling, bath pods, and finish work – and we’ll walk you through the options before a single measurement is taken. Licensed and insured, free written estimates, work backed by our workmanship warranty. Call (833) 620-6067. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












