







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Cover Construction
We provide independent Cover construction service in Lewisville, TX – cabinet installation and refacing, kitchen design and layout, and quartz and granite worktops built around how Cover’s cabinet boxes, fronts and hardware actually interact. What makes our Cover work different is that we treat the carcass, the runners and the worktop substrate as one system instead of forcing whatever cabinetry fits a showroom floor. We are not Cover, and we are not affiliated with or authorized by Cover. We’re an independent service provider working in Lewisville and the surrounding communities, and our technicians have up to 12 years of experience with this kind of cabinetry. Call (833) 620-6067. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We service and install Cover cabinet and storage systems as an independent provider – never as a dealer or factory-authorized shop.
- Cover lacquer fronts, push-to-open runners and integrated worktops each fail in specific, predictable ways. Diagnosis starts there.
- We use quality parts that fit Cover equipment, including Cover-compatible hardware and matching finishes where the carcass is sound.
- Refacing and reworking boxes usually solves kitchen wear; full replacement is honest advice only when the boxes themselves fail.
- Written, line-item estimates in Lewisville. The written estimate sets the final price.
Why Trust Construction Lewisville for Your Cover Construction?

Cover builds its cabinets and storage systems around proprietary hardware and cabinet-box dimensions. That’s the detail most contractors miss. When someone fits generic cabinetry into a Cover footprint, drawer fronts don’t line up, levelling fittings can’t reach the subfloor properly, and worktop overhangs land in the wrong place. Our technicians have spent time inside these systems. They know how a soft-close runner sits in a wall unit, how a handleless front opens without a pull, and how a tall larder pull-out needs a level floor beneath it before it’ll track cleanly under load.
We use quality parts that fit Cover equipment. Cover-compatible runners, hinges, levelling fittings and matching finishes go on the quote where they preserve how the system was designed to work. Where an exact Cover component is no longer available or adds nothing to durability, we use quality aftermarket hardware that fits the same bore pattern and load rating. Every repair is done warranty-safe: we don’t touch a component in a way that voids the manufacturer’s coverage, and we tell you upfront when a repair might affect it. That’s the difference between a shop that reads the cabinet and one that just swaps doors.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cover Construction Problems We Fix in Lewisville
Cover cabinets in Lewisville kitchens show a consistent set of problems. They come from wear, from install quality, and from the North Texas climate working on a house for a couple of decades. Here are the five we see most.
- Lacquer fronts that scuff, chip and haze at high-touch edges. Cover’s gloss and matte lacquer fronts take a beating in a busy kitchen. The worst wear lands on the edges of doors, around handleless cutouts, and where hands push a front open day after day. Once the finish lifts at an edge, moisture gets under it and the chip spreads. Refacing the doors preserves the carcass and restores the finish; matching a replacement front on a phased remodel keeps the kitchen looking like one job rather than two.
- Push-to-open and soft-close runners that stop latching flush. Cover wall and tall units lean on push-to-open mechanisms and soft-close runners. Both fail. The springs weaken, the runners drift out of alignment, or the mounting screws work loose in the cabinet side. The drawer then sits proud, catches on the frame, or won’t stay closed. Replacing the runner with compatible hardware and re-aligning the front usually solves it in one visit.
- Tall pantry and larder pull-outs that drift or sag. Cover integrated tall pantry and pull-out larder units ride on concealed runners. Loaded with cans and dry goods, they’re heavy. If the floor beneath isn’t dead flat, the runner tracks out of line and the whole unit sags and binds. Lewisville homes on expansive Blackland clay move, and a floor that was level last summer can drop two millimetres at the toe kick. Levelling the carcass and re-seating the runner fixes the sag without replacing the unit.
- Countertop seams and sink cut-outs that loosen or stain. Cover quartz and solid-surface worktops supplied with its kitchen packages only hold up if the substrate underneath is supported. When the original install skipped proper support, seams open, water gets into the joint, and a sink cut-out cracks. We check the substrate, reinforce where needed and reset the worktop before the joint fails.
- Doors that delaminate and drawer boxes that have been repaired twice already. Repeated delamination on a lacquer or veneer front, or drawers on their third set of runners, are the point where refacing stops paying for itself. That’s when we recommend a replacement – but only after looking at the carcass. Solid boxes on a good layout rarely need tearing out.
Here’s how this kind of job usually goes in Lewisville. A kitchen shows chipped and hazed gloss lacquer doors and push-to-open drawers that no longer sit flush, while the Cover boxes underneath are still solid and square. The cause is nearly always wear on the fronts plus failed or misaligned runners, not structural failure of the cabinetry. A qualified local pro checks carcass condition and level first, replaces the worn runners and hinges with compatible hardware, then either refaces the fronts or reworks the layout so new Cover-style doors and a properly supported quartz worktop fit the existing footprint and opening sizes. That sequencing is the whole decision, and it’s what saves a homeowner the cost of a full rip-out.
Cover Parts & Our Repair-vs-Replace Approach

Parts first. Where a Cover cabinet carcass is sound, we specify Cover-compatible OEM hardware and matching finishes so the repair holds the line the system was built to. Where the exact Cover part is no longer made, or where it adds no durability to the job, we fit quality aftermarket runners, hinges and levelling fittings with the same load rating and bore pattern. We don’t claim to stock or keep OEM Cover parts – we source what fits, and we tell you which is which on the quote.
Then the decision. Refacing and reworking the boxes wins when the fronts are worn or delaminating, the layout still fits the room, and the carcasses are solid. Replacement is honest advice only when the boxes themselves are failing, runners have been swapped twice already, or the layout no longer serves how you use the kitchen. On a phased remodel, we match finishes across phases so the second phase doesn’t announce itself. Call (833) 620-6067 to book a free estimate and we’ll walk you through the options before a single measurement is taken.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We check the Cover carcass for level, plumb and square, inspect the runners and hinges, test every push-to-open mechanism, and look at the worktop substrate and seams. We photograph the wear pattern because it tells us whether the problem is the front, the runner or the floor.
- 2
Repair or install plan in writing. You get a line-item written estimate with parts called out – Cover-compatible where it fits, quality aftermarket where it doesn’t – and a clear repair-versus-replace recommendation for each component. The written estimate sets the final price.
- 3
Repair or install. We level the carcass, replace the failed hardware, reface or fit new fronts, and set or reset the worktop with proper substrate support. Every drawer is opened and closed under load before we call it done.
- 4
Test and warranty-safe sign-off. Doors align, drawers latch flush, tall pull-outs track cleanly when loaded, and the worktop seams sit tight. We confirm every component was installed to the manufacturer’s spec so the warranty stays intact, and we hand you the parts list in writing.
See the difference
Before
After
Before
After
Before
AfterCover Products We Service & Install in Lewisville
We service and install Cover cabinet and storage systems for kitchens, plus the integrated worktops that come with its kitchen packages. That covers Cover gloss and matte lacquer cabinet fronts, handleless and push-to-open drawer mechanisms on wall and tall units, and integrated tall pantry and pull-out larder units with concealed runners. On the worktop side, we handle Cover quartz and solid-surface tops, seams, sink cut-outs and substrate support. We also install kitchen islands, backsplashes and cabinet layouts around the Cover system so the finished room works as a whole. Whether you’re repairing one component, refacing a full run of doors, or laying out a new kitchen around Cover boxes, we handle it as one job with one contractor and one written estimate.
We Also Service These Brands
Cover is one cabinet system among many. We also work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That matters because a Lewisville owner rarely needs just one brand throughout the house. If your kitchen holds Cover boxes and a Silestone top, or you’re matching a KraftMaid vanity in the bath to a Cambria worktop, we can specify the whole scope in one estimate instead of handing you off between vendors. You get real selection across the brands you research, not a take-it-or-leave-it package.
FAQs – Cover Construction Service in Lewisville

No. We are an independent Cover service provider and we are not affiliated with, authorized by, or a dealer for Cover. We repair, install and service Cover cabinet and storage systems using quality parts that fit them, and every recommendation comes from what your kitchen actually needs, not a dealer program’s inventory.
Yes. We specify Cover-compatible hardware and matching finishes where the carcass is sound, and quality aftermarket runners, hinges and levelling fittings where an exact Cover part is no longer available or adds no durability. We don’t claim to stock OEM or genuine Cover parts. Each parts choice is called out on the written estimate so you know what’s going in. Call (833) 620-6067 for a free estimate.
A single runner or hinge repair is typically one visit; a full reface across a kitchen run takes several days on site, and a full cabinet installation takes longer depending on layout and worktop. We give you the timeline on the written estimate before we start. Lewisville homes with older pier-and-beam floors can add levelling time, which we plan for upfront. Call (833) 620-6067 to book.
We service Cover gloss and matte lacquer cabinet fronts, handleless and push-to-open drawer mechanisms, integrated tall pantry and pull-out larder units with concealed runners, and the quartz and solid-surface worktops supplied with its kitchen packages. That includes cabinet installation and refacing, kitchen design and layout, and quartz and granite countertops.
No, provided the work is done to the manufacturer’s spec. We avoid any repair that alters a component in a way that voids coverage, and we tell you in advance if a repair might affect the warranty. Where a Cover part is no longer available and we fit aftermarket hardware, we note it on the estimate so you understand the coverage on that component. Call (833) 620-6067 with questions.
Typical estimated ranges for Cover kitchen work in Lewisville:
| Service | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Those are estimates only. The written estimate sets the final price, and it’s free. Wood-framed 1970s – 2000s tract housing and the lakefront homes around Lewisville Lake can both shift on the region’s expansive clay, so levelling and foundation work sometimes change the scope – we note that on the estimate, never as a change order after the fact. Call (833) 620-6067 for an exact quote.
Book Your Cover Service in Lewisville, TX
Whether you need a reface of chipped lacquer fronts, a runner and hinge overhaul, or a full layout around a supported quartz worktop, we’ll walk you through the material options before a single measurement is taken. One contractor, every phase, from the cabinet box to the countertop edge. Call (833) 620-6067. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












