







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Tremron Construction
We provide independent Tremron construction and repair service in Lewisville, and what sets our work apart is the base underneath it. Tremron is a paver and hardscape manufacturer, and the parts of a Tremron installation that fail first in Lewisville are almost never the pavers themselves. They’re the base, the joint sand, and the edge restraint holding everything together. We understand that difference because we work with Tremron products constantly.
To be clear: Construction Lewisville is an independent Tremron service provider. We are not authorized, certified, sponsored or employed by Tremron, and we carry no OEM parts for their equipment. What we do have is a working knowledge of how Tremron pavers and wall blocks behave on North Texas soil, and the installation and repair experience to get the base right the first time.
Our technicians have up to 12 years of experience with hardscape and construction work. We handle paver driveways, patios, and driveway replacements across Lewisville, from Old Town to Castle Hills. Call (833) 620-6067 for a free estimate.
Why Trust Construction Lewisville for Your Tremron Construction?

Tremron pavers are concrete hardscape products. That means the product is only as good as the system installed around it, and a lot of our work involves correcting a base that was under-built. We know which Tremron lines are structural and which are decorative, and we know how to specify the correct aggregate, joint sand, and compaction for the expansive clay soil that runs through much of Lewisville.
We repair and install Tremron pavers with quality parts that fit the product. That means matching the exact Tremron series and color for repairs rather than substituting a lookalike from another brand. Concrete pavers have a compressive strength and a mix that varies by manufacturer, and an aftermarket paver that looks right on day one can behave very differently under a Texas summer and a spring hail season.
Warranty-safe work matters here too. Tremron publishes installation guidance for its products, and much of that guidance covers base prep, joint sand, and edge restraint. Following the manufacturer’s spec protects you if a product issue ever comes up. As an independent provider, we work to that spec because it’s the right way to install concrete pavers. It’s not an official endorsement of our work by Tremron.
Our focus on Lewisville is deliberate. The city’s clay soils and its lake-adjacent terrain create hardscape challenges that don’t show up in the same way in Plano or Carrollton. Call (833) 620-6067 and we’ll walk you through the options before a single measurement is taken.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Tremron Construction Problems We Fix in Lewisville
Whether you have an older Tremron Oldtown driveway or a newer Plaza patio, the failure modes we see in Lewisville tend to fall into a handful of predictable categories. Here’s what each one looks like and why it happens.
- Efflorescence on Tremron Oldtown and Plaza pavers. A white, powdery bloom appears on the surface, often within the first year after installation or after a wet season. The cause is usually a base that traps moisture, which lets calcium hydroxide migrate up through the concrete and react with air. Lewisville’s heavy clay holds water longer than sandy soil does, so an under-drained base makes this worse. It’s a symptom of a base problem, not dirt that will wash away.
- Joint sand washout and paver shifting. Sand migrates out of the joints, pavers begin to rock, and the pattern starts to drift. On Tremron driveways this usually points to a bedding layer that wasn’t compacted properly or edge restraint that’s too shallow or missing. Sloped driveways are especially prone to it. Left alone, shifting pavers chip at the corners and wear the joints wider with each passing season.
- Color fading and surface scaling. De-icing salts or a sealer applied incorrectly can strip color and cause surface scaling on Tremron pavers. A film-forming sealer that traps moisture can compound the problem, especially during freeze-thaw cycles in North Texas winters. Tremron pavers are color-fast in the sense that the pigment is in the concrete, but they’ll still dull if the surface is abused.
- Retaining wall block cracking or leaning. Tremron Chesapeake wall blocks are engineered for retaining walls, but they need geogrid reinforcement and drainage behind the wall to do their job. On a slope, water pressure builds up fast without a drainage aggregate and an outlet, and the wall can lean or crack along its length.
- Settling over expansive clay. Lewisville sits on Blackland clay that swells when it’s wet and shrinks when it’s dry. An otherwise sound Tremron installation can develop dips or high spots as the subgrade moves seasonally. This shows up as low spots that pool water, or as pavers that feel uneven when you walk across them.
Here’s how one of these typically goes. A homeowner notices efflorescence on a Tremron Oldtown paver driveway, along with some pavers that rock slightly when stepped on. The usual cause is moisture trapped in the base because the original installer used too much fines or didn’t compact the bedding layer, and the efflorescence is calcium hydroxide wicking to the surface. A qualified paver contractor will pull the affected pavers, inspect the base, re-compact or rebuild it with open-graded aggregate, re-lay the Tremron pavers with fresh joint sand, and apply a breathable sealer after the pavers dry. Film-forming sealers that trap moisture are the wrong move.
Tremron Parts & Our Repair-vs-Replace Approach

With Tremron, the pavers and wall blocks are the structural product. That’s different from roofing or a kitchen cabinet run, where you’re often replacing a worn part inside a bigger system. Here, matching the exact Tremron series and color is what makes a repair look right and perform right. Aftermarket lookalikes won’t blend, and their compressive strength can differ from what’s already underfoot.
For a failed section, the honest answer is usually repair, but only after we look at the base. Replacing the affected pavers and correcting the base beneath them is faster, cheaper, and less disruptive than a full tear-out. For widespread settling or efflorescence across an entire installation, a full tear-out and re-base is the recommendation that actually holds up. We’ll show you what we found and explain both paths.
We don’t claim to stock or carry OEM Tremron parts. What we do is source quality pavers and wall blocks that fit your specific Tremron product, and we verify the series before ordering so the repair blends. If you’re not sure what’s under your driveway, call (833) 620-6067 for a free estimate. We’ll identify it in person.
Our Tremron Service Process – Step by Step
- 1
Diagnosis. We start with a walk of the surface, checking for efflorescence, rocking pavers, joint sand loss, and any dips that pool water. We test the base by lifting a paver at the edge and inspecting the aggregate underneath. On a retaining wall, we check for lean, drainage outlets, and whether geogrid is present.
- 2
Repair or installation plan. We specify the aggregate, bedding depth, compaction method, joint sand, edge restraint, and sealer type. For a repair, we verify the exact Tremron series and color so the new pavers blend. For a new installation, we plan the excavation and base depth around the actual clay conditions on site.
- 3
Execution. Pavers are laid to the manufacturer’s spec with proper compaction and joint sand. Retaining walls get geogrid and drainage aggregate behind the block. Edges get a restraint deep enough to hold against lateral push.
- 4
Test and walkthrough. We check for water pooling, rocking, and joint consistency, then walk the finished work with you. You get the sealer recommendation in writing, plus what to expect during the first wet season.
- 5
Warranty and follow-up. We stand behind our workmanship, and we document the installation so the product remains eligible for its manufacturer coverage. If something moves within the warranty period, we come back and look at it.
See the difference
Before
After
Before
After
Before
AfterTremron Products We Service & Install in Lewisville

Tremron makes concrete pavers and wall systems, and we work with the full range of what they make for residential use. On the paver side, we install and repair Tremron Oldtown pavers for driveways and walkways, Tremron Plaza series pavers for patios and pool decks, and Tremron Capri pavers for driveways and larger open areas. For retaining walls and grade changes, we work with Tremron Chesapeake wall blocks, including the reinforcement and drainage details those walls require on sloped lots.
We install new Tremron surfaces and repair failing ones. Most of our Tremron work in Lewisville falls into three buckets: paver driveway installation, paver patio installation, and driveway replacement where an old surface has failed beyond repair. We also handle spot repairs on individual pavers and retaining walls.
We Also Service These Brands
Tremron is one of more than 50 manufacturers we work with. On the hardscape side, we also install and service Belgard, Unilock, Techo-Bloc, and Cambridge Pavers, plus utility-grade products from Quikrete and Sakrete for base and concrete work. Inside the home, we work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and fixtures from Kohler, Moen, Grohe, Toto, Blanco, and Delta. One contractor covers the exterior and interior phases of a project without handing you off to a second vendor.
| Tremron & Hardscape Service | Typical Estimated Range in Lewisville |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
These are typical estimated ranges for the Lewisville market. Your specific scope, base condition, and paver selection will move the number, and the written estimate sets the final price.
FAQs – Tremron Construction Service in Lewisville
No. Construction Lewisville is an independent Tremron service provider. We are not authorized, certified, sponsored, or employed by Tremron, and we carry no OEM parts for their equipment. We work with Tremron pavers and wall blocks because we know the product and install it correctly, not because we have a manufacturer relationship. If you need a Tremron warranty claim handled, we can point you to the manufacturer’s process. For an estimate on a repair or installation, call (833) 620-6067.
Yes. We match the exact Tremron series and color for repairs, and we verify the mix and compressive strength of any paver we source before it goes down. We don’t claim to use OEM or genuine Tremron parts, and we don’t stock them. What we do is source quality pavers and wall blocks that fit the product, then install them to the manufacturer’s spec. For joint sand, base aggregate, edge restraint, and geogrid, we use materials appropriate to the specific installation. Call (833) 620-6067 for a free estimate.
A typical Tremron paver driveway installation in Lewisville takes several days of work once the base is prepped, plus a cure window before you drive on it. A spot repair on a few pavers is often a single visit. A retaining wall replacement depends on the wall length and slope. We’ll give you a realistic timeline in the written estimate. Call (833) 620-6067 to schedule a walkthrough.
We service and install Tremron Oldtown pavers, Plaza series pavers, Capri pavers, and Chesapeake wall blocks. That covers paver driveways, patios, walkways, pool decks, and retaining walls. If your property has a Tremron product we haven’t listed, call us and describe it. If it’s a paver or wall system, chances are we’ve worked with it.
Improper installation can void a manufacturer warranty, and proper installation protects it. That’s why we work to Tremron’s published installation guidance on base prep, joint sand, compaction, and edge restraint. As an independent provider, we can’t make a warranty determination on Tremron’s behalf, but we can make sure your installation is done in a way that keeps the product coverage intact. Call (833) 620-6067 and we’ll walk you through what that means for your specific product.
Typical estimated ranges in Lewisville: paver driveway installation runs $7,000 – $18,000, paver patio installation runs $3,500 – $11,000, and driveway replacement runs $5,000 – $14,000. Those ranges depend on the base condition, paver selection, and the size of the area. The written estimate sets the final price. Call (833) 620-6067 for a free estimate.
We can usually match the series and color, but no repair is invisible. Concrete pavers weather and darken over time, so a brand-new Oldtown paver next to a ten-year-old one can read slightly lighter for the first season. Matching the exact Tremron series and color is what keeps the blend close; aftermarket lookalikes won’t match at all. Call (833) 620-6067 and we’ll look at your pavers before ordering.
Those white stains are usually efflorescence, a calcium reaction inside the concrete that comes from moisture trapped in the base. Scrubbing doesn’t fix it because the source is underneath. The real fix is correcting the base drainage and letting the pavers dry before applying a breathable sealer. Call (833) 620-6067 for an inspection.
Most Tremron paver driveways are ready for foot traffic quickly after compaction and joint sand, but it’s best to keep vehicles off for a cure window we’ll specify in your written estimate. That window depends on the base and joint sand used. Applying the sealer too soon traps moisture and causes more problems. Call (833) 620-6067 for a realistic timeline.
Sealing is optional but often recommended in Lewisville, where hail, sun, and clay soil all put stress on a paver surface. The key is using a breathable, penetrating sealer rather than a film-forming one, and waiting until the pavers are dry. Seal too soon or with the wrong product and you trap moisture and worsen efflorescence. Call (833) 620-6067 and we’ll recommend the right product for your installation.
Yes, and this is one of the most important places to install Tremron Chesapeake blocks correctly. A wall on a slope needs geogrid reinforcement and a drainage aggregate behind it to relieve water pressure from Lewisville’s clay soil. Without them, the wall leans and cracks even with quality block. Call (833) 620-6067 for a slope inspection and a written estimate.
Book Your Tremron Service in Lewisville, TX
Tremron pavers and wall blocks are strong products. The base underneath them decides whether they stay that way. Construction Lewisville handles new Tremron installations, failing paver repairs, and retaining wall corrections across Lewisville, and we’ll give you a straight answer on repair versus replacement. Call (833) 620-6067 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












