







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Jerith Construction
We provide independent Jerith construction service in Lewisville for aluminum ornamental fencing, vinyl privacy fencing, vinyl ranch rail, and pool-code fencing with self-closing gates. What sets our Jerith work apart is that we’re independent: we’re not affiliated with or authorized by Jerith, so we can recommend repair, rebuild, or a different system based on what your fence actually needs. Our technicians have up to 12 years of experience reading how Jerith extrusions, brackets, and gate hardware wear under North Texas sun and on this city’s expansive clay.
Lewisville sits on the eastern shore of Lewisville Lake, and that lakeside building envelope shapes fence work here in ways it doesn’t in Plano or Carrollton. Lakefront lots deal with floodplain elevations, hillside grades, and Corps of Engineers and Denton County floodplain rules, and fencing along a shoreline property has to handle wind, moisture, and grade changes that a flat suburban lot never sees. Older pier-and-beam homes around Old Town and the Lewisville core have their own fencing quirks, while the newer large-lot builds in Castle Hills and Homestead often want longer ornamental runs and pool enclosures. We work across all of it. Call (833) 620-6067 to schedule a free estimate.
Why Trust Construction Lewisville for Your Jerith Construction?

We see Jerith systems often enough in Lewisville that we can tell from a walk-down what’s failing and why. Aluminum ornamental runs show powder-coat chalking on south- and west-facing pickets after several summers of intense UV, and the same visits turn up loose gate hinges more often than rail or picket damage. Vinyl privacy panels bow and sag between posts when the footings don’t account for Blackland clay movement. Pool-code gates drop out of self-closing tolerance because the hinge hardware corrodes or the post has shifted. Knowing which of those is happening changes the whole scope.
That familiarity matters most when we choose parts. We source hardware and components by gauge, profile, and finish so they fit Jerith equipment properly, and we’re candid about when a current-profile part is the right match versus when a quality aftermarket piece does the job on an older line. Nothing we install is described as factory, OEM, or dealer parts, because we don’t make that claim. What we can promise is that our work is done to protect what your Jerith warranty covers: we don’t drill, cut, or alter a profile in ways that void coverage, and we document what we did. That’s the point of warranty-safe service. An owner who calls us gets a straight answer on what failed, what it takes to fix it, and whether a repair is the honest call or a replacement is.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Fix in Lewisville
Most Jerith calls in Lewisville trace back to the same handful of failure modes, and the North Texas climate and clay soil explain nearly all of them.
- Powder-coat chalking and fading on aluminum pickets. After several summers of intense UV, the factory finish breaks down and leaves a chalky white film that wipes off on hands and clothes. It’s cosmetic at first, but once the coating fails the aluminum underneath is exposed to moisture, and the fade accelerates on sun-facing runs.
- Vinyl panels bowing or sagging between posts. Expansive Blackland clay swells and shrinks with the seasons, and when posts aren’t set at the right depth with proper concrete and drainage, they move. A panel that looks warped is often just following a post that has shifted. Thermal movement is a second culprit when panels are fit tight with no room to expand.
- Gate hinges and latches loosening or corroding. On pool-code gates this is the one that matters most, because a gate that won’t self-close and latch is a safety failure, not a nuisance. Corroded hardware and a shifted hinge post are the usual causes, and the fix usually starts with re-setting or reinforcing the post rather than swapping the hinge alone.
- Post caps and bottom rails cracking or pulling loose. Thermal movement works caps loose over time, and mower impact finishes the job. A missing cap lets water into the post, and a separated bottom rail compromises the panel’s stability.
- Clay-soil post lean on vinyl runs. This is the classic Lewisville symptom: a run that was plumb when installed but leans after a few wet and dry cycles. The fix is footing work, not panel work, and that’s why a proper diagnosis matters before anyone quotes a repair.
Jerith Parts & Our Repair-vs-Replace Approach

Parts are where a lot of fence repairs go wrong, so we’re specific about it. For Jerith systems, we source OEM-compatible brackets, caps, hinges, and latches when the profile is still current, and we match gauge and finish with quality aftermarket parts for older lines where the original component isn’t available. We don’t stock or carry genuine Jerith parts as a dealer, and we’re not a Jerith dealer. We fit quality parts to your equipment.
The repair-versus-replace call comes down to the structure. If the posts and rails are sound and the problem is hardware, panels, or finish, hardware-and-panel repair is usually the honest answer, and it costs far less. Full replacement only makes sense when footings have failed or multiple sections are compromised, because at that point you’re rebuilding the foundation of the run anyway. We’ll tell you which case you’re in before you commit. Call (833) 620-6067 for a free estimate and a straight read on which path fits your fence.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We walk the run and check what’s actually failing: post plumb, footing depth and drainage, panel fit, gate hardware, and finish condition. On aluminum we look for chalking and corrosion; on vinyl we look for bowing, bottom-rail separation, and post lean. We separate cosmetic wear from structural problems so the quote reflects what’s real.
- 2
Repair or install. For repairs we re-set or replace posts with proper concrete and gravel where drainage is poor, refit panels with room for thermal movement, and swap hardware to fit the existing profile. For new installs we plan footing depth for the clay and grade, and set the run true.
- 3
Test. On pool-code gates we check self-closing and latching action after the hardware goes on, because a gate that looks right but won’t latch is a fail. We check every section for plumb and every panel for movement.
- 4
Warranty. We leave you with a clear record of the parts and work so your Jerith warranty coverage isn’t compromised by anything we did, and we back our workmanship.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Lewisville
We handle the Jerith aluminum and vinyl systems that show up across Lewisville, from the older core to the lake neighborhoods. That includes Jerith Industrial Grade aluminum ornamental fencing, which we repair and install on residential runs; Jerith Regency vinyl privacy fencing, the system we see most often for backyards and side yards; Jerith Berkshire vinyl ranch rail, common on larger lots and horse-property edges; and Jerith aluminum pool-code fencing with self-closing gates, where hardware and gate tolerance matter most. We service, repair, and install these systems with quality parts that fit them, and we don’t claim to stock any of it. If you’re not sure which system you have, we can identify it on a walk-down and quote from there.
We Also Service These Brands
Fencing is one part of a broader bench. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, so a homeowner coordinating a larger project doesn’t have to bring in a separate contractor for every material. That multi-brand range is why we can be honest about Jerith: we’re not tied to one system, and our recommendation follows your fence, not a brand program.
FAQs – Jerith Construction Service in Lewisville

No. We are an independent Jerith service provider in Lewisville, not affiliated with or authorized by Jerith. That independence is deliberate: it lets us recommend repair, rebuild, or a different system based on your fence’s actual condition rather than a manufacturer program. We service, repair, and install Jerith systems with quality parts that fit them.
Yes. We source OEM-compatible brackets, caps, hinges, and latches when the profile is current, and we match gauge and finish with quality aftermarket parts for older lines. We don’t claim to stock or carry genuine Jerith parts, and we’re not a dealer. We fit the right part to the profile you have. Call (833) 620-6067 for a free estimate.
Most Jerith repairs are a single-visit job, though panel and post work on a bowed run can run longer once footing depth and drainage get addressed. A gate hardware swap is quick; re-setting posts in clay takes more time because the concrete has to be right. We give you a realistic timeline with the written estimate, and the price is set per job by that estimate.
We cover Jerith aluminum and vinyl fencing and railing systems: Industrial Grade aluminum ornamental, Regency vinyl privacy, Berkshire vinyl ranch rail, and aluminum pool-code fencing with self-closing gates. We repair, install, and service these across Lewisville, from Old Town to the lake neighborhoods. If you’re unsure of your system, we can identify it on a walk-down.
Warranty-safe work is the goal, and that means not altering a profile in ways that void coverage. We do the work to protect what your Jerith warranty covers and document the parts and methods we use. We don’t promise what Jerith will or won’t cover; we simply keep our work inside the lines so the warranty isn’t compromised by what we do.
Typical estimated ranges for Jerith fence work in Lewisville run $3,500 to $9,000 for vinyl privacy installation and $4,000 to $10,000 for aluminum ornamental installation, with repairs usually well below those figures. These are typical estimates, and the written estimate sets the final price. Here’s how the line items break down:
| Jerith Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Call (833) 620-6067 for an exact quote. Estimates are free.
A leaning Jerith vinyl fence can usually be repaired if the posts and rails are structurally sound, because the lean is almost always a footing problem rather than a panel problem. A pro re-sets or replaces the affected posts with proper concrete and gravel, checks drainage, and refits the panels with room for thermal movement. Full replacement only makes sense when footings have failed across multiple sections.
Powder-coat chalking and fading is UV breakdown of the factory finish after several summers of intense North Texas sun, and it shows up first on south- and west-facing runs. It’s mostly cosmetic at first, but once the coating fails the aluminum underneath is exposed and the fade speeds up. The fix is a recoat or panel replacement on the affected sections, not a full tear-out.
On a pool-code gate that won’t self-close and latch, the usual culprit is corroded or loosened hinge hardware, often combined with a hinge post that has shifted. The fix starts with re-setting or reinforcing the post, then replacing the hardware to fit the profile. A gate that won’t latch is a safety issue, so it’s worth addressing promptly. Call (833) 620-6067 for a free estimate.
Yes, in practice they often do. Lewisville’s expansive Blackland clay swells and shrinks with the seasons, and a post set at a shallow depth will move with the soil and take the panel with it. Proper footing depth with concrete and gravel for drainage is what keeps a vinyl run plumb. This is why we check footing depth on any repair, not just panel fit.
Often yes. We match gauge and finish with quality aftermarket parts for older lines where the original component isn’t available, and OEM-compatible parts when the profile is still current. The match depends on the profile and finish, which we identify on a walk-down. Call (833) 620-6067 for a free estimate and we’ll tell you what’s possible for your line.
Book Your Jerith Service in Lewisville, TX
Whether your Jerith vinyl privacy run is bowing in the clay or your aluminum pool-code gate has stopped latching, we’ll give you a straight read on repair versus replacement before you commit. Call (833) 620-6067 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll walk you through the material options before a single measurement is taken.
Written by the team at Construction Lewisville.












