







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Lewisville Homeowners Choose Kohler Construction
We provide independent Kohler construction service in Lewisville, TX: fixture repair, tile and fixture installation, full bathroom remodeling, and walk-in shower builds using Kohler faucetry, toilet suites, shower wall systems, and kitchen sinks. What separates our Kohler work is familiarity with the parts and finishes themselves. Kohler fixtures have distinctive valve bodies, trim, and mounting hardware, and technicians who don’t know them tend to force components that were designed to seat a specific way. Our technicians have up to 12 years of experience, and they’ve handled enough Kohler product to know where wear shows up first. We’re an independent service provider, not affiliated with or authorized by Kohler. Call (833) 620-6067 for a free estimate.
Why Trust Construction Lewisville for Your Kohler Construction?

Kohler builds fixtures with tight tolerances, and that changes how a repair is done. A ceramic cartridge in a Kohler faucet seats against a machined surface; if a technician cranks it down or swaps in a cartridge with a different profile, the drip comes back or the handle stiffens. The same applies to fill and flush assemblies in Kohler toilets and to the clip systems under Kohler’s undermount sinks. Knowing those details is the difference between a fix and a callback.
Our approach is warranty-safe service. We don’t cut into a fixture body to save a part, we don’t substitute a finish-matched piece for something that will visibly differ, and we test before we close a wall or set a panel back in place. When a Kohler fixture is under an active manufacturer warranty, we tell you what the warranty likely covers so you can decide whether to pursue it directly. That’s the honest version.
We also back our own installation work with a workmanship warranty, and every project is measured and priced on a written line-item estimate before the work begins. If you’re in Castle Hills or Homestead with a newer build, or in the Old Town core where the housing stock runs older, the Kohler products in your home deserve a technician who has seen the failure modes before. Call (833) 620-6067 to schedule your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Lewisville
Kohler fixtures fail in predictable ways. Most of what we see on service calls in Lewisville falls into one of these patterns.
- Worn ceramic cartridge valves in Kohler Artifacts and Purist faucets. The cartridge valves inside Kohler Artifacts and Purist faucetry wear over years of use, and the first symptom is usually a slow drip at the spout or a handle that feels stiff or gritty when you turn it. North Texas water carries minerals that accelerate the wear, so a fixture that’s fine elsewhere can start dripping sooner here. Replacing the cartridge on the correct seating surface usually solves it.
- Fill and flush valve trouble in Memoirs and Devonshire toilets. Kohler Memoirs and Devonshire toilet suites use fill and flush assemblies that leak or run intermittently once mineral buildup collects on the valve seat or the flapper stops sealing cleanly. A toilet that refills itself for a few seconds in the middle of the night is the classic sign. This is a parts problem, not usually a reason to replace the toilet.
- Separating seams on Choreograph shower wall systems. Kohler Choreograph shower wall panels are joined with seams and caulk lines, and those lines can fail when a home shifts or when the original caulk was applied over a damp surface. Once a seam opens, moisture gets behind the panel and stays there. Resealing properly means drying the cavity first, not just adding a bead over the gap.
- Loosening undermount sink clips on Riverby and Whitehaven sinks. The clips that hold a Kohler Riverby or Whitehaven undermount sink to the countertop can loosen over time, and the sink begins to drop away from the stone by a fraction of an inch. Left alone, that gap traps water and stresses the seal. Re-torquing or replacing the mounting hardware before the sink separates is the right call.
- Finish wear and pitting on older Kohler trim. Kohler finishes hold up well, but older trim can pit or discolor in spots, particularly around a faucet base where water sits. Matching a replacement piece to the surviving finish is a real constraint, especially on discontinued lines.
Kohler Parts & Our Repair-vs-Replace Approach

For Kohler fixtures, genuine manufacturer parts are often necessary rather than optional. Finish matching and valve compatibility are the two reasons. A cartridge built to Kohler’s tolerances seats correctly and holds; a generic one may seat but wear faster or change how the handle feels. Aftermarket parts can work fine for standard wear items like flappers, but on the valve side, we lean toward the manufacturer part when it’s available. We don’t claim to stock OEM or genuine Kohler parts. What we do is source quality parts that fit your equipment and tell you plainly which ones are manufacturer and which aren’t.
The repair-or-replace call follows a simple logic. If the fixture body is sound and the parts are available, repair is usually the right answer and costs far less. If the model has been discontinued and the part isn’t obtainable, or if the repair cost climbs close to the price of a new fixture, replacement makes more sense. We walk you through both numbers before you commit. Call (833) 620-6067 for an exact quote; estimates are free.
Our Kohler Service Process – Step by Step
Every Kohler job follows the same sequence, whether it’s a single faucet or a full bathroom.
- 1
Diagnosis. We identify the fixture and the actual failure before touching anything. A dripping Artifacts faucet might be the cartridge, the O-rings, or a seat issue, and the fix differs. On toilets, we separate a valve problem from a flapper problem from a supply-line problem.
- 2
Repair or install. Service work uses parts matched to the fixture and follows the manufacturer’s installation spec. For a remodel, this is where tile and fixtures come together: rough-in heights, valve placement, and panel layout get set before finish work starts.
- 3
Test. We run the fixture under pressure, cycle the handle or the flush, and check for weeps at every connection. On a shower wall system, we check the seams and caulk lines and confirm water runs to the drain the way it should.
- 4
Warranty and hand-off. You get the workmanship warranty in writing and a clear record of what part was replaced and why, which matters if a manufacturer warranty question comes up later.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Lewisville

We work across the Kohler product lines that show up in Lewisville homes: kitchen and bath faucetry including the Artifacts and Purist lines, toilet suites including Memoirs and Devonshire, Choreograph shower wall systems, and undermount kitchen sinks in the Riverby and Whitehaven lines. On the installation side, we handle walk-in shower builds, tub-to-shower conversions, vanity replacements, and full bathroom remodels where Kohler fixtures are the anchor of the design.
Because our scope runs from the roof down to the driveway, a bathroom that involves Kohler fixtures and new tile sits alongside the rest of your project rather than requiring a second contractor. One point of contact, one schedule.
We Also Service These Brands
Kohler isn’t the only name in the house, and we work with the others too. KraftMaid cabinetry, Cambria and Silestone countertops, and Toto fixtures all come up in the same remodels, and we handle them alongside Kohler without sending you to a separate vendor. That’s a practical advantage when a bathroom or kitchen is being planned as a whole rather than piece by piece.
FAQs – Kohler Construction Service in Lewisville
No. We are an independent Kohler service provider. Construction Lewisville is not affiliated with, authorized by, or a dealer for Kohler, and we don’t claim to be factory-trained or certified by the manufacturer. What we do have is hands-on familiarity with Kohler fixtures and the parts that fit them.
In most cases the faucet can be repaired. A dripping Kohler Artifacts faucet is usually a worn ceramic cartridge or a sealing O-ring, not a failed body, and replacing the cartridge restores it. Replacement only becomes the sensible choice when the model is discontinued and the right cartridge can’t be sourced. Call (833) 620-6067 for an exact quote; estimates are free.
No. A Kohler Memoirs toilet that runs intermittently almost always has a fill valve or flapper issue, often from mineral buildup on the valve seat. That’s a parts replacement, not a new toilet. We check the supply line and shut-off at the same time and adjust the flapper chain tension so the problem doesn’t return. Call (833) 620-6067 to book a visit.
Seams can open, but it’s usually installation or movement related rather than a defect in the panel. Caulk lines fail faster when they were applied over a damp surface or when the wall behind has shifted. The fix involves drying the cavity, resealing properly, and confirming the panels are still fastened tight. Call (833) 620-6067 for an assessment.
We use quality parts that fit your Kohler fixture, and on valve-side repairs we favor manufacturer parts because finish and tolerance matching matter there. Standard wear items like flappers can come from aftermarket sources. We don’t claim to stock OEM Kohler parts, and we’ll always tell you which type of part is going in. Call (833) 620-6067 to discuss your fixture.
Often yes, but it depends on the finish and whether the line is still in production. Kohler finishes vary by line, and mixing a surviving piece with a new one in a near-match finish can read differently under bathroom lighting. We’ll show you the options before you decide. Call (833) 620-6067 for a free estimate.
A straightforward repair like a faucet cartridge or a toilet fill valve is usually done in a single visit. A walk-in shower installation or a full bathroom remodel runs longer and depends on tile curing, fixture lead time, and inspection scheduling. You’ll get a timeline with the written estimate before work starts.
Kitchen and bath faucetry, toilet suites, shower wall systems, and undermount kitchen sinks, plus the tile and fixture work around them. We handle the three Kohler sub-services we do most in Lewisville: tile and fixtures, full bathroom remodeling, and walk-in shower installation.
Independent service doesn’t automatically void a manufacturer warranty, but the terms are Kohler’s to set, not ours. We work to the manufacturer’s installation spec and document what part was replaced, which keeps your record clean if a warranty question comes up. Call (833) 620-6067 with the fixture details and we’ll talk it through.
Here’s what typical estimated ranges look like for Kohler-driven bathroom work in the Lewisville area. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Smaller jobs land at the low end, and a full remodel with tile, Kohler fixtures, and vanity work lands higher. Call (833) 620-6067 for an exact quote; estimates are free.
Book Your Kohler Service in Lewisville, TX
Whether it’s a dripping Artifacts faucet, a Memoirs toilet that won’t stop running, or a full bathroom remodel built around Kohler fixtures, we’re ready to look at it. Estimates are free and every job gets a written line-item quote before work starts. Call (833) 620-6067. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












