







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Roanoke
If you own a home in Roanoke and your fence needs to go up, we install wood, privacy, vinyl, aluminum, and iron fencing for yards all over town, from the older ranch lots near downtown to the newer subdivisions off the Hwy 114 and 170 corridor. Roanoke is a small city in Tarrant County where old and new sit close together, and that shapes how a fence job actually runs here. A tight yard changes how we stage material, how we set posts, and how we document a shared line before anyone starts digging. Call (833) 620-6067 for a free estimate.
Why Roanoke Homeowners Call Construction Lewisville for Fence Installation

We work across Lewisville and the surrounding Tarrant County communities, and Roanoke is one of the places we know well enough to plan for its quirks before we show up. Our technicians have up to 12 years of experience, and that experience matters most on the lots that don’t behave the way the plat says they should.
When you call, you get a real conversation about your yard, your line, and your HOA. You’ll get a written, line-item estimate before work begins, and we pull the permits the job requires and see the inspection through. That means the price you’re quoted is the price you pay, and the fence that goes in meets current code.
We also bring the material depth to match. As one contractor with seven service lines, we carry relationships with more than 50 manufacturer brands, so the fence you want isn’t limited to whatever a single installer happens to push. We’ll walk you through the material options before a single measurement is taken, so you can weigh wood against vinyl against aluminum on your lot, not on a showroom floor an hour away.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Roanoke
Wood Fence Installation in Roanoke
Wood is the fence we build most in Roanoke, and on the older streets near downtown that usually means a dog-ear or board-on-board privacy run that ties cleanly into an existing gate. On west-side lots in The Bluffs and Fairways of Roanoke, wood often comes with an HOA-specified height and stain color, so we confirm those specs before anything ships. We set posts on proper footings with concrete and drainage so the Texas heat and periodic freezes don’t rack the line out of plumb within a season.

Privacy Fence Installation in Roanoke
A privacy fence in a tight Roanoke subdivision is as much about the neighbor relationship as the boards. We walk the shared side of the line before layout, confirm the property line against the plat, and set height to match what your HOA allows. If you want six feet of solid screen and your neighbor’s fence is already on the line, we sort out the overlap in writing before we dig.

Vinyl Fence Installation in Roanoke
Vinyl holds up well against North Texas sun and stays out of the repaint cycle, which is why a lot of newer Roanoke builds go that direction. We install Bufftech and ActiveYards panels with the manufacturer’s post and rail spec, so the warranty holds. A typical vinyl fence in Roanoke runs $3500 – $9000, depending on linear feet, height, and gate count.

Aluminum Fence Installation in Roanoke
Aluminum is the pick for front-yard enclosures, pool perimeters, and anyone who wants to see the landscaping through the rails. We work with Barrette and Master Halco lines and set posts to the same depth and drainage standard as wood. A typical aluminum fence in Roanoke runs $4000 – $10000.
If you’re sorting out which material fits your yard, our fence installation team can walk you through the options in person.
Trusted Brands We Service in Roanoke
We install fencing from Bufftech, ActiveYards, Barrette, and Master Halco, and we order to your job rather than promising something off a local stockpile. Turnaround on a standard panel run is quick once the estimate is signed and the permit is in hand. Because we’re working across brand lines, you’ll see the difference in gate hardware, post caps, and panel profiles that some single-brand installers can’t offer. If you’ve already picked a brand from a builder packet or a neighbor’s yard, tell us and we’ll price it.
Common Fence Installation Problems We See in Roanoke Homes
- Post holes hitting clay-heaved grade. On older downtown-area lots, the expansive clay has shifted slab and pier-and-beam grade, so a post dug to a nominal depth can end up short and the run can gap under the bottom rail. We check grade off the platted line and set the footing to compensate.
- HOA style and height restrictions discovered after material is ordered. West-side subdivisions often specify fence style, height, and stain up front, and when that isn’t confirmed first you get a change order and a delay. We pull the HOA documents before the order goes out.
- Shared-line disputes on tight lots. When a neighbor’s fence line, an easement, or a drainage swale isn’t confirmed in writing, excavation turns into a conversation mid-job. We document the line first and get the neighbor on paper.
- Out-of-square layouts on legacy lots. String lines on older Roanoke properties regularly show the existing fence running off the platted boundary because of unrecorded old fence lines and clay movement. We lay out from the plat, not from the fence that’s already there.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Roanoke, TX

Fencing in Roanoke is priced per job from a written estimate, and the final number is set by that document, not a phone guess. A typical full vinyl privacy installation in Roanoke runs $3500 – $9000, and a typical aluminum installation runs $4000 – $10000. What moves you within those ranges is linear feet, fence height, gate count, and how much line needs correcting on a lot where the existing fence is out of square. Tight-lot staging, clay obstructions, and HOA submittal work all feed into the quote as well, so the first number you see reflects the yard you actually have.
| Service | Typical Estimated Range in Roanoke |
|---|---|
| Vinyl Fence Installation | $3500 – $9000 |
| Aluminum Fence Installation | $4000 – $10000 |
Estimates are free, and you get the line items in writing before any deposit is discussed.
The Tight-Lot Reality of Fencing in Roanoke
A Roanoke fence bid often splits along a geological line. On the older streets near downtown, posts set along legacy pier-and-beam and slab lots regularly hit clay-driven foundation movement and out-of-square property lines. West-side subdivisions like The Bluffs and Fairways of Roanoke are platted on engineered post-tension slabs with HOA-approved fence styles specified up front. That means two identical-looking rear yards a few miles apart can require completely different post-setting, line-layout, and approval approaches, and the quote has to reflect which side of town you’re on.
On the tighter lots, staging and parking become part of the plan. Material gets dropped close to the work zone, the crew keeps the street clear, and the shared wall or party-wall conversation with your neighbor gets handled on paper before excavation begins. Access constraints change the labor side of the estimate as much as the materials do, and we’d rather tell you that up front than surprise you later.
A typical Roanoke fence installation starts with a yard that looks flat but is not. Expansive clay has heaved the older slab or shifted a pier-and-beam home’s grade, so string lines show the existing fence out of square to the platted property line. A qualified local pro pulls current plat and HOA documents, calls for utility locates, sets posts below the local frost depth with proper concrete and drainage, and walks the neighbor side of shared lines before layout so a party-wall conversation happens on paper rather than mid-job.
We Also Serve Cities Near Roanoke
Roanoke sits right at the edge of several other Tarrant County communities, and we work those too. If you’re just across the line in Trophy Club, Southlake, Keller, or Northlake, the same process applies: written estimate, permit pulled, line confirmed, install done to spec. Call (833) 620-6067 to schedule a free estimate in any of them.
Serving Roanoke, TX – Our Local Coverage Area
We serve Roanoke and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Roanoke
Most fence installations in Roanoke need a permit, and we handle the permit application and inspection as part of the job. Permit requirements can vary by lot and by whether your subdivision is under an overlay or HOA restriction, so we confirm the current rules with the city before we order material. Call (833) 620-6067 for an exact quote, estimates are free.
Expansive clay in this part of Tarrant County moves with wet and dry cycles, so posts have to be set below the local frost depth with proper concrete and drainage to stay plumb. On older downtown-area lots, we check the existing slab or pier-and-beam grade before layout and compensate for whatever heave has occurred. Call (833) 620-6067 to have your lot evaluated, the estimate is free.
Confirm the line against the plat and get your neighbor’s acknowledgment in writing before excavation begins. On tight lots, a shared party wall, an easement, or the neighbor’s existing fence can sit right where the new post line wants to go, and a document beats a mid-job argument every time. We walk the shared side with you before we set a single post. Call (833) 620-6067 for a free estimate.
Most Roanoke HOAs will approve a standard style if it matches their height, material, and color rules, but the surest path is to submit the specific product spec before ordering. We pull the current HOA documents for your subdivision and line the order up to them so there’s no change order later. Call (833) 620-6067 with your address and we’ll talk through the requirements.
A tight lot changes the labor side of the quote, not just the material side. Where material can’t be staged close and the crew has to hand-carry panels or work around a shared wall, the estimate accounts for that extra time. The written estimate sets the final price, so there’s no surprise once work starts. Call (833) 620-6067 for a free estimate.
Fencing in Roanoke isn’t the same job on every street, and we price it that way. Whether you’re replacing a sagging line near the downtown core or hanging a new privacy run behind a Fairways of Roanoke home, we’ll confirm the property line, sort the HOA requirements, pull the permit, and set posts that stay plumb through clay movement and North Texas freeze cycles. Choose from Bufftech, ActiveYards, Barrette, or Master Halco; we work with all of them, and we’ll walk you through the material options before a single measurement is taken. Call (833) 620-6067 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Lewisville.












