







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Lewisville Homeowners
A fence should still be standing straight and solid a decade after it goes in. Too many homeowners here find out the hard way that a low bid meant shallow posts, skipped concrete, or panels set without a proper line. Our technicians have up to 12 years of experience and know what a Texas fence takes: correct post depth, proper concrete at every post, and panel layout that holds up through summer heat and the occasional North Texas storm. We work with wood, chain link, vinyl, aluminum, iron and commercial fencing, and we’ll walk you through the material options before a single measurement is taken. Estimates are free and written line by line. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 620-6067 to get your Lewisville fence project priced.
What Our Fence Installation Service Includes
Wood Fence
A wood fence is the classic choice for privacy in Lewisville yards, usually built from cedar or treated pine and often styled as a dog-eared or board-on-board privacy run. It makes sense when you want full-height coverage at a moderate price and the flexibility to repair or replace individual boards over time. We set posts at the proper depth with concrete footings, frame every panel properly, and set the rails and pickets so the run stays square along your property lines.

Chain Link Fence
Chain link is the practical workhorse: galvanized or vinyl-coated steel mesh stretched tight on steel posts and top rail, used for side and back boundary runs, pet enclosures, and light commercial lots. You need it when durability and visibility matter more than looks, or when you want to enclose a large yard without a big budget hit. We set posts in concrete, tension the fabric correctly so it doesn’t sag, and fit gates that swing and latch cleanly.

Vinyl Fence
Vinyl fencing is extruded PVC, typically built as a privacy run with tongue-and-groove panels or styled to mimic a picket fence. It suits homeowners who want a clean look that won’t be painted or stained and won’t rot or feed termites. We set vinyl posts on the manufacturer’s spec with the right reinforcement, check the grade and product line before we order, and make sure expansion is accounted for so panels stay put through Texas heat.

Aluminum Fence
Aluminum fencing is a powder-coated ornamental metal system with a welded or rackable panel design, common along front yards, pool perimeters, and property lines where a homeowner wants open sightlines. It’s the right call when you don’t need privacy but you want a defined boundary that won’t rust through. We set aluminum posts with proper concrete footings and align the run so every panel sits level and every gate closes without dragging.
Iron Fence
Wrought iron fencing is heavier, hotter, and tougher than aluminum, favored for driveways, estates, and front-property boundaries where you want a real presence. It’s the choice when the run is exposed, security matters, and you’re prepared for a material that will last. We set iron posts in concrete, plumb and level every section, and primer-and-paint touch-ups where needed so the finish stays intact through the seasons.
Fence Repair
Fence repair covers the fixes short of a full replacement: leaning posts, broken pickets, sagging gates, split rails, and panels that pulled loose. If your fence is mostly sound and only one section failed, repair is usually the smarter spend. We assess the whole run first, tell you honestly which panels are worth saving, and reset or replace posts and hardware only where necessary.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with the fence manufacturers homeowners ask about most, which means real selection rather than a take-it-or-leave-it single line. Barrette and Master Halco products come up constantly in vinyl and steel runs; we know how their systems are reinforced, where the panels flex and how gates should be hung so they stay true. On the ornamental side we work with Ameristar and Jerith, and we know how their welded panels rack and align on sloped lots. Whether you have a brand in mind or you want to see options side by side, we’ll walk you through material choices before we measure anything.
Our roster runs past fifty named manufacturers across the categories we handle, and within fencing that means we can match product to your budget tier and your yard. An Ameristar aluminum run across a front yard takes different post work than a Barrette vinyl privacy line along a back boundary, and we quote them accordingly. If you’re comparing brands, ask us about the warranty terms on the panels versus the hardware: those often differ and they matter more than the brochure color. Whether you have Ameristar, Jerith, or any other make in mind, we can help you put together a spec that fits the property and the price.
Signs You Need Fence Installation Right Now
- Posts are leaning or wobbling. A post that rocks when you push it has lost its footing or never had enough concrete. Once one goes, the panels on either side are carrying the load and starting to fail with it.
- Panels are sagging or out of line. If the run dips between posts instead of holding a straight top line, the framing or top rail has given out. That’s a sign the fence is past repair by tighter boards alone.
- Rot, rust-through, or crumbling at the base. Soft wood at the soil line or rust that’s eaten through the mesh or rails means the material itself is failing. Repairs become a cycle at that point, and a new run is the better spend.
- Gates drag, stick, or won’t latch. A gate that’s dropped on its hinges usually points to a post that moved or hardware that’s pulled loose. It’s also the first thing visitors notice about a fence, and it’s a security weak point.
- The fence sits inside or outside your property line. A fence set wrong can cause problems with neighbors and future surveys. If you’re unsure where the line runs, a new fence is a good time to get it right before posts go in.
Our Fence Installation Process – Step by Step
- 1
Walk the property and talk scope. We look at what you have, what you want, and how the layout works with your yard, gates, and driveway. If property lines are unclear, we’ll flag it and tell you what to sort out before we set anything.
- 2
Material selection, then measurement. We walk you through wood, chain link, vinyl, aluminum and iron options, compare the product lines and the warranty terms, then take exact measurements of every run and gate opening. You’ll know what you’re getting before we quote.
- 3
Written line-item estimate. You get the price broken down by run, gate, and material, so you can compare like for like. The written estimate sets the final price, and fixed pricing means no change orders on the job.
- 4
Site setup and post setting. We call out utilities before digging, mark the line, and set posts at the proper depth with concrete at every footing. Posts cure before panels are hung, which is the step that determines whether the fence stays true.
- 5
Install, inspect, and close out. We hang panels and gates, check level and swing on every gate, clean the work area, and walk the finished run with you. Workmanship is backed by warranty, and we leave the property ready to use.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Lewisville?

The short answer: a typical vinyl fence installation in Lewisville runs $3,500 – $9,000, and a typical aluminum fence installation runs $4,000 – $10,000. Those are estimated ranges for common yard sizes and standard runs. The written estimate sets the final price, and it’s free.
What moves the number up or down:
- Linear feet. The single biggest driver. A short side run and a full back-boundary wrap are different jobs.
- Material and product line. Economy chain link and premium ornamental iron sit at opposite ends.
- Gates and openings. Each gate adds hardware, framing, and swing work.
- Post depth and soil. Some yards need deeper footings or rock removal, which changes labor.
- Terrain and access. Sloped lots and tight side yards take more fitting than a flat open run.
- Old fence removal. Tear-out and haul-away are real labor if you’re replacing a run.
How to avoid overpaying: get a quote broken down by run and gate, not a single lump sum, and confirm what’s included for post depth, concrete, hardware, and cleanup. Ask about warranty terms on both panels and hardware. A free estimate from us includes a site walkthrough, material options at every budget tier, and a written line-item price you can compare. Call (833) 620-6067 for an exact quote.
Fence Installation Near Lewisville – Our Service Area
We take fence work across Lewisville and the surrounding towns, including Highland Village, Coppell, Flower Mound, Corinth, Lantana, Grapevine, Southlake, Trophy Club, Colleyville, Roanoke, and Euless. Drive times vary by location, but we book estimates and installs in the same week for most nearby jobs. See our fence installation coverage for Highland Village or fence installation coverage for Coppell. If you’re outside those areas, call and we’ll tell you honestly whether we can get to you. For the full picture of everything we handle, see Construction Lewisville.
Serving Lewisville, TX – Our Local Coverage Area
We serve Lewisville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Lewisville

Fence installation is the process of setting posts, framing, and hanging panels to create a boundary, privacy screen, pet enclosure, or security line around a property. It covers the full job: utility locate, post excavation, concrete footings, material selection, panel and gate assembly, and cleanup. We handle wood, chain link, vinyl, aluminum, iron, privacy runs, gates, and light commercial fencing. Call (833) 620-6067 if you want to talk through which material fits your yard.
Most residential fence jobs take one to three days, depending on linear feet, material, and how many gates are in the plan. Post footings need time to set before panels go up, which is why a longer run can stretch into a second or third day. Terrain, old fence removal, and weather can shift the schedule. You’ll get a clear timeline with your estimate.
Typical estimated ranges are $3,500 – $9,000 for vinyl and $4,000 – $10,000 for aluminum, with wood and chain link usually landing lower depending on the run. Final price depends on linear feet, material, gates, terrain, and whether you need old fence removed. The written estimate sets the final price and it’s free. Call (833) 620-6067 for an exact quote.
Yes, we work with Ameristar along with Barrette, Master Halco, and Jerith on the fence side. We know how their welded panels rack and align on sloped lots and how gates should be hung to stay true. Whether you want a specific brand or you’re open to options, we’ll show you the lines that fit your plan and budget. Call (833) 620-6067 to talk material choices.
We can often get a same-day estimate or a repair out to Lewisville. Dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (833) 620-6067 to book a visit; we answer 24/7.
Our workmanship is backed by warranty, and product warranties come from the manufacturer on top of that. Warranty terms differ between panels, hardware, and gates, so we spell out what’s covered before you sign. Ask about both at the estimate so you can compare like for like. Call (833) 620-6067 with questions about coverage.
Clear the fence line of furniture, planters, hoses, and anything else in the way, and make sure someone is available to point out the property lines. Mark any private irrigation, lighting, or utility lines you know of so we don’t hit them. Confirm gate locations and swing directions before the crew arrives. Call (833) 620-6067 if you’re unsure what needs clearing.
Schedule Your Fence Installation Service in Lewisville Today
Get a straight answer on price and timeline before any work begins. We’ll walk the yard, talk materials, and hand you a written line-item estimate with fixed pricing and no change orders. Estimates are free, and workmanship is backed by warranty. Call (833) 620-6067. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you’re also planning a driveway or paver project, we can quote that in the same visit.
Written by the team at Construction Lewisville.












